[U-Boot] [PATCH 2/6] MX: RTC13783 uses general function to access PMIC

Stefano Babic sbabic at denx.de
Mon Apr 19 09:56:56 CEST 2010


The RTC is part of the Freescale's PMIC controller.
Use general function to access to PMIC internal registers.

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 drivers/rtc/mc13783-rtc.c |   72 +++++++++-----------------------------------
 1 files changed, 15 insertions(+), 57 deletions(-)

diff --git a/drivers/rtc/mc13783-rtc.c b/drivers/rtc/mc13783-rtc.c
index 416f50d..4e18f80 100644
--- a/drivers/rtc/mc13783-rtc.c
+++ b/drivers/rtc/mc13783-rtc.c
@@ -23,53 +23,30 @@
 #include <common.h>
 #include <rtc.h>
 #include <spi.h>
-
-static struct spi_slave *slave;
+#include <fsl_pmic.h>
 
 int rtc_get(struct rtc_time *rtc)
 {
 	u32 day1, day2, time;
-	u32 reg;
-	int err, tim, i = 0;
-
-	if (!slave) {
-		/* FIXME: Verify the max SCK rate */
-		slave = spi_setup_slave(CONFIG_MC13783_SPI_BUS,
-				CONFIG_MC13783_SPI_CS, 1000000,
-				SPI_MODE_2 | SPI_CS_HIGH);
-		if (!slave)
-			return -1;
-	}
-
-	if (spi_claim_bus(slave))
-		return -1;
+	int tim, i = 0;
 
 	do {
-		reg = 0x2c000000;
-		err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day1,
-				SPI_XFER_BEGIN | SPI_XFER_END);
-
-		if (err)
-			return err;
-
-		reg = 0x28000000;
-		err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&time,
-				SPI_XFER_BEGIN | SPI_XFER_END);
+		day1 = pmic_reg_read(REG_RTC_DAY);
+		if (day1 < 0)
+			return -1;
 
-		if (err)
-			return err;
+		time = pmic_reg_read(REG_RTC_TIME);
+		if (time < 0)
+			return -1;
 
-		reg = 0x2c000000;
-		err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day2,
-				SPI_XFER_BEGIN | SPI_XFER_END);
+		day2 = pmic_reg_read(REG_RTC_DAY);
+		if (day2 < 0)
+			return -1;
 
-		if (err)
-			return err;
 	} while (day1 != day2 && i++ < 3);
 
-	spi_release_bus(slave);
-
 	tim = day1 * 86400 + time;
+
 	to_tm(tim, rtc);
 
 	rtc->tm_yday = 0;
@@ -80,34 +57,15 @@ int rtc_get(struct rtc_time *rtc)
 
 int rtc_set(struct rtc_time *rtc)
 {
-	u32 time, day, reg;
-
-	if (!slave) {
-		/* FIXME: Verify the max SCK rate */
-		slave = spi_setup_slave(CONFIG_MC13783_SPI_BUS,
-				CONFIG_MC13783_SPI_CS, 1000000,
-				SPI_MODE_2 | SPI_CS_HIGH);
-		if (!slave)
-			return -1;
-	}
+	u32 time, day;
 
 	time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
 		      rtc->tm_hour, rtc->tm_min, rtc->tm_sec);
 	day = time / 86400;
 	time %= 86400;
 
-	if (spi_claim_bus(slave))
-		return -1;
-
-	reg = 0x2c000000 | day | 0x80000000;
-	spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day,
-			SPI_XFER_BEGIN | SPI_XFER_END);
-
-	reg = 0x28000000 | time | 0x80000000;
-	spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&time,
-			SPI_XFER_BEGIN | SPI_XFER_END);
-
-	spi_release_bus(slave);
+	pmic_reg_write(REG_RTC_DAY, day);
+	pmic_reg_write(REG_RTC_TIME, time);
 
 	return 0;
 }
-- 
1.6.3.3



More information about the U-Boot mailing list