[U-Boot] [PATCH v2] pm9263 converted to at91 soc access

Asen Dimov dimov at ronetix.at
Mon Apr 19 13:18:43 CEST 2010


Signed-off-by: Asen Dimov <dimov at ronetix.at>
---
 board/ronetix/pm9263/led.c    |   15 ++--
 board/ronetix/pm9263/pm9263.c |  195 +++++++++++++++++++++--------------------
 include/configs/pm9263.h      |   87 +++++++++---------
 3 files changed, 152 insertions(+), 145 deletions(-)

diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c
index fe1a1d2..4e585a4 100644
--- a/board/ronetix/pm9263/led.c
+++ b/board/ronetix/pm9263/led.c
@@ -26,18 +26,19 @@
 #include <common.h>
 #include <asm/arch/at91sam9263.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
 #include <asm/arch/io.h>
 
 void coloured_LED_init(void)
 {
+	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+
 	/* Enable clock */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
-				      1 << AT91SAM9263_ID_PIOCDE);
+	writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer);
 
-	at91_set_gpio_output(CONFIG_RED_LED, 1);
-	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+	at91_set_pio_output(CONFIG_RED_LED, 1);
+	at91_set_pio_output(CONFIG_GREEN_LED, 1);
 
-	at91_set_gpio_value(CONFIG_RED_LED, 0);
-	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+	at91_set_pio_value(CONFIG_RED_LED, 0);
+	at91_set_pio_value(CONFIG_GREEN_LED, 1);
 }
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 23ea154..c7835de 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -27,13 +27,13 @@
 #include <common.h>
 #include <asm/sizes.h>
 #include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
 #include <asm/arch/hardware.h>
 #include <lcd.h>
@@ -55,52 +55,59 @@ DECLARE_GLOBAL_DATA_PTR;
 static void pm9263_nand_hw_init(void)
 {
 	unsigned long csa;
+	at91_smc_t 	*smc 	= (at91_smc_t *) AT91_SMC0_BASE;
+	at91_matrix_t 	*matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
 
 	/* Enable CS3 */
-	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
-	at91_sys_write(AT91_MATRIX_EBI0CSA,
-		       csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+	csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
+	writel(csa, &matrix->csa[0]);
 
 	/* Configure SMC CS3 for NAND/SmartMedia */
-	at91_sys_write(AT91_SMC_SETUP(3),
-		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(1) |
-		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(1));
-	at91_sys_write(AT91_SMC_PULSE(3),
-		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
-		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-	at91_sys_write(AT91_SMC_CYCLE(3),
-		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-	at91_sys_write(AT91_SMC_MODE(3),
-		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-		       AT91_SMC_EXNWMODE_DISABLE |
+	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
+		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
+		&smc->cs[3].setup);
+
+	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+		&smc->cs[3].pulse);
+
+	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+		&smc->cs[3].cycle);
+
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+		AT91_SMC_MODE_EXNW_DISABLE |
 #ifdef CONFIG_SYS_NAND_DBW_16
-		       AT91_SMC_DBW_16 |
+		AT91_SMC_MODE_DBW_16 |
 #else /* CONFIG_SYS_NAND_DBW_8 */
-		       AT91_SMC_DBW_8 |
+		AT91_SMC_MODE_DBW_8 |
 #endif
-		       AT91_SMC_TDF_(2));
+		AT91_SMC_MODE_TDF_CYCLE(2),
+		&smc->cs[3].mode);
 
 	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
 
 	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
 #ifdef CONFIG_MACB
 static void pm9263_macb_hw_init(void)
 {
+	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pio_t	*pio	= (at91_pio_t *) AT91_PIO_BASE;
+
 	/*
 	 * PB27 enables the 50MHz oscillator for Ethernet PHY
 	 * 1 - enable
 	 * 0 - disable
 	 */
-	at91_set_gpio_output(AT91_PIN_PB27, 1);
-	at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
+	at91_set_pio_output(AT91_PIO_PORTB, 27, 1);
+	at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */
 
 	/* Enable clock */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+	writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
 
 	/*
 	 * Disable pull-up on:
@@ -110,19 +117,15 @@ static void pm9263_macb_hw_init(void)
 	 *
 	 * PHY has internal pull-down
 	 */
-	writel(pin_to_mask(AT91_PIN_PC25),
-	       pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
-	writel(pin_to_mask(AT91_PIN_PE25) |
-	       pin_to_mask(AT91_PIN_PE26),
-	       pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
 
+	at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0);
+	at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0);
 
 	/* Re-enable pull-up */
-	writel(pin_to_mask(AT91_PIN_PC25),
-	       pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
-	writel(pin_to_mask(AT91_PIN_PE25) |
-	       pin_to_mask(AT91_PIN_PE26),
-	       pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
+	at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1);
+	at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1);
 
 	at91_macb_hw_init();
 }
@@ -148,17 +151,17 @@ vidinfo_t panel_info = {
 
 void lcd_enable(void)
 {
-	at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */
+	at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power up */
 }
 
 void lcd_disable(void)
 {
-	at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
+	at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */
 }
 
 #ifdef CONFIG_LCD_IN_PSRAM
 
-#define PSRAM_CRE_PIN	AT91_PIN_PB29
+#define PSRAM_CRE_PIN	AT91_PIO_PORTB, 29
 #define PSRAM_CTRL_REG	(PHYS_PSRAM + PHYS_PSRAM_SIZE - 2)
 
 /* Initialize the PSRAM memory */
@@ -166,31 +169,34 @@ static int pm9263_lcd_hw_psram_init(void)
 {
 	volatile uint16_t x;
 	unsigned long csa;
+	at91_smc_t 	*smc 	= (at91_smc_t *) AT91_SMC1_BASE;
+	at91_matrix_t 	*matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
 
 	/* Enable CS3  3.3v, no pull-ups */
-	csa = at91_sys_read(AT91_MATRIX_EBI1CSA);
-	at91_sys_write(AT91_MATRIX_EBI1CSA,
-		       csa | AT91_MATRIX_EBI1_DBPUC |
-		       AT91_MATRIX_EBI1_VDDIOMSEL_3_3V);
+	csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC |
+		AT91_MATRIX_CSA_VDDIOMSEL_3_3V;
+
+	writel(csa, &matrix->csa[1]);
 
 	/* Configure SMC1 CS0 for PSRAM - 16-bit */
-	at91_sys_write(AT91_SMC1_SETUP(0),
-		       AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
-		       AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-	at91_sys_write(AT91_SMC1_PULSE(0),
-		       AT91_SMC_NWEPULSE_(7) | AT91_SMC_NCS_WRPULSE_(7) |
-		       AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(7));
-	at91_sys_write(AT91_SMC1_CYCLE(0),
-		       AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
-	at91_sys_write(AT91_SMC1_MODE(0),
-		       AT91_SMC_DBW_16 |
-		       AT91_SMC_PMEN |
-		       AT91_SMC_PS_32);
+	writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
+		AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
+		&smc->cs[0].setup);
+
+	writel(AT91_SMC_PULSE_NWE(7) | AT91_SMC_PULSE_NCS_WR(7) |
+		AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(7),
+		&smc->cs[0].pulse);
+
+	writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
+		&smc->cs[0].cycle);
+
+	writel(AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_PMEN | AT91_SMC_MODE_PS_32,
+		&smc->cs[0].mode);
 
 	/* setup PB29 as output */
-	at91_set_gpio_output(PSRAM_CRE_PIN, 1);
+	at91_set_pio_output(PSRAM_CRE_PIN, 1);
 
-	at91_set_gpio_value(PSRAM_CRE_PIN, 0);	/* set PSRAM_CRE_PIN to '0' */
+	at91_set_pio_value(PSRAM_CRE_PIN, 0);	/* set PSRAM_CRE_PIN to '0' */
 
 	/* PSRAM: write BCR */
 	x = readw(PSRAM_CTRL_REG);
@@ -216,7 +222,7 @@ static int pm9263_lcd_hw_psram_init(void)
 	/* test if the chip is MT45W2M16B */
 	if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) {
 		/* try with CRE=1 (MT45W2M16A) */
-		at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
+		at91_set_pio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
 
 		/* write RCR of the PSRAM */
 		x = readw(PSRAM_CTRL_REG);
@@ -229,17 +235,14 @@ static int pm9263_lcd_hw_psram_init(void)
 		writew(0x1234, PHYS_PSRAM);
 		writew(0x5678, PHYS_PSRAM+2);
 		if ((readw(PHYS_PSRAM) != 0x1234)
-		   || (readw(PHYS_PSRAM + 2) != 0x5678))
+		  || (readw(PHYS_PSRAM + 2) != 0x5678))
 			return 1;
 
 	}
 
 	/* Bus matrix */
-	at91_sys_write( AT91_MATRIX_PRAS5, AT91_MATRIX_M5PR );
-	at91_sys_write( AT91_MATRIX_SCFG5, AT91_MATRIX_ARBT_FIXED_PRIORITY |
-				(AT91_MATRIX_FIXED_DEFMSTR & (5 << 18)) |
-				AT91_MATRIX_DEFMSTR_TYPE_FIXED |
-				(AT91_MATRIX_SLOT_CYCLE & (0xFF << 0)));
+	writel(AT91_MATRIX_PRA_M5(3), &matrix->pr[5].a);
+	writel(CONFIG_PSRAM_SCFG, &matrix->scfg[5]);
 
 	return 0;
 }
@@ -247,35 +250,37 @@ static int pm9263_lcd_hw_psram_init(void)
 
 static void pm9263_lcd_hw_init(void)
 {
-	at91_set_A_periph(AT91_PIN_PC0, 0);	/* LCDVSYNC */
-	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
-	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
-
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+
+	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDVSYNC */
+	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDHSYNC */
+	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDDOTCK */
+	at91_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* LCDDEN */
+	at91_set_b_periph(AT91_PIO_PORTB, 9, 0);	/* LCDCC */
+	at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* LCDD2 */
+	at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* LCDD3 */
+	at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* LCDD4 */
+	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* LCDD5 */
+	at91_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD6 */
+	at91_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD7 */
+	at91_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD10 */
+	at91_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD11 */
+	at91_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDD12 */
+	at91_set_b_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD13 */
+	at91_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDD14 */
+	at91_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDD15 */
+	at91_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDD18 */
+	at91_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDD19 */
+	at91_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDD20 */
+	at91_set_b_periph(AT91_PIO_PORTC, 17, 0);	/* LCDD21 */
+	at91_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDD22 */
+	at91_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDD23 */
+
+	writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer);
 
 	/* Power Control */
-	at91_set_gpio_output(AT91_PIN_PA22, 1);
-	at91_set_gpio_value(AT91_PIN_PA22, 0);	/* power down */
+	at91_set_pio_output(AT91_PIO_PORTA, 22, 1);
+	at91_set_pio_value(AT91_PIO_PORTA, 22, 0);	/* power down */
 
 #ifdef CONFIG_LCD_IN_PSRAM
 	/* initialize te PSRAM */
@@ -337,13 +342,15 @@ void lcd_show_board_info(void)
 
 int board_init(void)
 {
+	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+
 	/* Enable Ctrlc */
 	console_init_f();
 
-	at91_sys_write(AT91_PMC_PCER,
-					(1 << AT91SAM9263_ID_PIOA) |
-					(1 << AT91SAM9263_ID_PIOCDE) |
-					(1 << AT91SAM9263_ID_PIOB));
+	writel((1 << AT91SAM9263_ID_PIOA) |
+		(1 << AT91SAM9263_ID_PIOCDE) |
+		(1 << AT91SAM9263_ID_PIOB),
+		&pmc->pcer);
 
 	/* arch number of AT91SAM9263EK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_PM9263;
@@ -394,7 +401,7 @@ int board_eth_init(bd_t *bis)
 {
 	int rc = 0;
 #ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x01);
+	rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
 #endif
 	return rc;
 }
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index f854f38..9735e6a 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AT91_LEGACY
-
 /* ARM asynchronous clock */
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -49,41 +47,37 @@
 
 /* clocks */
 #define CONFIG_SYS_MOR_VAL						\
-		(AT91_PMC_MOSCEN |					\
+		(AT91_PMC_MOR_MOSCEN |					\
 		 (255 << 8))		/* Main Oscillator Start-up Time */
 #define CONFIG_SYS_PLLAR_VAL						\
-		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-		 AT91_PMC_OUT |						\
-		 AT91_PMC_PLLCOUNT |	/* PLL Counter */		\
+		(AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
+		 AT91_PMC_PLLXR_OUT(3) |				\
+		 AT91_PMC_PLLXR_PLLCOUNT(0x3f) |	/* PLL Counter */\
 		 (2 << 28) |		/* PLL Clock Frequency Range */	\
 		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
 
 #if (MAIN_PLL_DIV == 2)
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR1_VAL		\
-		(AT91_PMC_CSS_SLOW |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
+		(AT91_PMC_MCKR_CSS_SLOW |	\
+		 AT91_PMC_MCKR_PRES_1 |	\
+		 AT91_PMC_MCKR_MDIV_2)
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR2_VAL		\
-		(AT91_PMC_CSS_PLLA |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
+		(AT91_PMC_MCKR_CSS_PLLA |	\
+		 AT91_PMC_MCKR_PRES_1 |	\
+		 AT91_PMC_MCKR_MDIV_2)
 #else
 /* PCK/4 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR1_VAL			\
-		(AT91_PMC_CSS_SLOW |		\
-		 AT91_PMC_PRES_1 |		\
-		 AT91RM9200_PMC_MDIV_3 |	\
-		 AT91_PMC_PDIV_1)
+		(AT91_PMC_MCKR_CSS_SLOW |		\
+		 AT91_PMC_MCKR_PRES_1 |		\
+		 AT91_PMC_MCKR_MDIV_4)
 /* PCK/4 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR2_VAL			\
-		(AT91_PMC_CSS_PLLA |		\
-		 AT91_PMC_PRES_1 |		\
-		 AT91RM9200_PMC_MDIV_3 |	\
-		 AT91_PMC_PDIV_1)
+		(AT91_PMC_MCKR_CSS_PLLA |		\
+		 AT91_PMC_MCKR_PRES_1 |		\
+		 AT91_PMC_MCKR_MDIV_4)
 #endif
 /* define PDC[31:16] as DATA[31:16] */
 #define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
@@ -91,8 +85,8 @@
 #define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
 #define CONFIG_SYS_MATRIX_EBI0CSA_VAL					\
-	(AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |	\
-	 AT91_MATRIX_EBI0_CS1A_SDRAMC)
+	(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V |	\
+	 AT91_MATRIX_CSA_EBI_CS1A)
 
 /* SDRAM */
 /* SDRAMC_MR Mode register */
@@ -135,32 +129,32 @@
 
 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
 #define CONFIG_SYS_SMC0_SETUP0_VAL					\
-		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
-		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+		(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |	\
+		 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
 #define CONFIG_SYS_SMC0_PULSE0_VAL					\
-		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
-		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+		(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |	\
+		 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
 #define CONFIG_SYS_SMC0_CYCLE0_VAL	\
-		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+		(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
 #define CONFIG_SYS_SMC0_MODE0_VAL				\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
+		(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |	\
+		 AT91_SMC_MODE_DBW_16 |				\
+		 AT91_SMC_MODE_TDF |				\
+		 AT91_SMC_MODE_TDF_CYCLE(6))
 
 /* user reset enable */
 #define CONFIG_SYS_RSTC_RMR_VAL			\
 		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
+		AT91_RSTC_CR_PROCRST |		\
+		AT91_RSTC_MR_ERSTL(1) |	\
+		AT91_RSTC_MR_ERSTL(2))
 
 /* Disable Watchdog */
 #define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
+		(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT |	\
+		 AT91_WDT_MR_WDV(0xfff) |					\
+		 AT91_WDT_MR_WDDIS |				\
+		 AT91_WDT_MR_WDD(0xfff))
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS 1
@@ -196,8 +190,8 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PB7	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PB8	/* this is the user1 led */
+#define	CONFIG_RED_LED		AT91_PIO_PORTB, 7	/* this is the power led */
+#define	CONFIG_GREEN_LED	AT91_PIO_PORTB, 8	/* this is the user1 led */
 
 #define CONFIG_BOOTDELAY	3
 
@@ -258,8 +252,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PB30
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTD, 15
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTB, 30
 
 #endif
 
@@ -273,6 +267,11 @@
 /* PSRAM */
 #define	PHYS_PSRAM			0x70000000
 #define	PHYS_PSRAM_SIZE			0x00400000	/* 4MB */
+/* Slave EBI1, PSRAM connected */
+#define CONFIG_PSRAM_SCFG		(AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY	| \
+					 AT91_MATRIX_SCFG_FIXED_DEFMSTR(5)	| \
+					 AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED	| \
+					 AT91_MATRIX_SCFG_SLOT_CYCLE(255))
 
 /* Ethernet */
 #define CONFIG_MACB			1
-- 
1.5.5.6



More information about the U-Boot mailing list