[U-Boot] [PATCH] da830: Move common code out of da830evm.c file

[Sudhakar Rajashekhara]

TI's DA850/OMAP-L138 platform is similar to DA830/OMAP-L137
in many aspects. So instead of repeating the same code in
multiple files, move the common code to a different file
and call those functions from the respective da830/da850
files.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj at ti.com>
---
 board/davinci/common/misc.c       |   30 ++++++++++++++++++++++++++++++
 board/davinci/common/misc.h       |    6 ++++++
 board/davinci/da830evm/da830evm.c |   28 +++++++++++-----------------
 3 files changed, 47 insertions(+), 17 deletions(-)

diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index 25ca326..412ab50 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -41,6 +41,22 @@ int dram_init(void)
 	return(0);
 }
 
+void irq_init(void)
+{
+	/*
+	 * Mask all IRQs by clearing the global enable and setting
+	 * the enable clear for all the 90 interrupts.
+	 */
+
+	writel(0, &davinci_aintc_regs->ger);
+
+	writel(0, &davinci_aintc_regs->hier);
+
+	writel(0xffffffff, &davinci_aintc_regs->ecr1);
+	writel(0xffffffff, &davinci_aintc_regs->ecr2);
+	writel(0xffffffff, &davinci_aintc_regs->ecr3);
+}
+
 #ifdef CONFIG_DRIVER_TI_EMAC
 
 /* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
@@ -186,3 +202,17 @@ int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
 
 	return 0;
 }
+
+/*
+ * Enable PSC for various peripherals.
+ */
+int davinci_configure_lpsc_items(const struct lpsc_resource *item,
+				    const int n_items)
+{
+	int i;
+
+	for (i = 0; i < n_items; i++)
+		lpsc_on(item[i].lpsc_no);
+
+	return 0;
+}
diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h
index 329c369..84fafe9 100644
--- a/board/davinci/common/misc.h
+++ b/board/davinci/common/misc.h
@@ -45,10 +45,16 @@ struct pinmux_resource {
 				.n_pins = ARRAY_SIZE(item) \
 			  }
 
+struct lpsc_resource {
+	const int	lpsc_no;
+};
+
 int dvevm_read_mac_address(uint8_t *buf);
 void dv_configure_mac_address(uint8_t *rom_enetaddr);
 int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins);
 int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
 				    int n_items);
+int davinci_configure_lpsc_items(const struct lpsc_resource *item,
+				    int n_items);
 
 #endif /* __MISC_H */
diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c
index ed668af..3f13ab7 100644
--- a/board/davinci/da830evm/da830evm.c
+++ b/board/davinci/da830evm/da830evm.c
@@ -120,21 +120,18 @@ static const struct pinmux_resource pinmuxes[] = {
 #endif
 };
 
+static const struct lpsc_resource lpsc[] = {
+	DAVINCI_LPSC_AEMIF,	/* NAND, NOR */
+	DAVINCI_LPSC_SPI0,	/* Serial Flash */
+	DAVINCI_LPSC_EMAC,	/* image download */
+	DAVINCI_LPSC_UART2,	/* console */
+	DAVINCI_LPSC_GPIO,
+};
+
 int board_init(void)
 {
 #ifndef CONFIG_USE_IRQ
-	/*
-	 * Mask all IRQs by clearing the global enable and setting
-	 * the enable clear for all the 90 interrupts.
-	 */
-
-	writel(0, &davinci_aintc_regs->ger);
-
-	writel(0, &davinci_aintc_regs->hier);
-
-	writel(0xffffffff, &davinci_aintc_regs->ecr1);
-	writel(0xffffffff, &davinci_aintc_regs->ecr2);
-	writel(0xffffffff, &davinci_aintc_regs->ecr3);
+	irq_init();
 #endif
 
 #ifdef CONFIG_NAND_DAVINCI
@@ -165,11 +162,8 @@ int board_init(void)
 	 * assuming here that the DSP bootloader has set the IOPU
 	 * such that PSC access is available to ARM
 	 */
-	lpsc_on(DAVINCI_LPSC_AEMIF);    /* NAND, NOR */
-	lpsc_on(DAVINCI_LPSC_SPI0);     /* Serial Flash */
-	lpsc_on(DAVINCI_LPSC_EMAC);     /* image download */
-	lpsc_on(DAVINCI_LPSC_UART2);    /* console */
-	lpsc_on(DAVINCI_LPSC_GPIO);
+	if (davinci_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
+		return 1;
 
 	/* setup the SUSPSRC for ARM to control emulation suspend */
 	writel(readl(&davinci_syscfg_regs->suspsrc) &
-- 
1.5.6