[U-Boot] UBI partigion in u-boot

[Ewer, Edward E]

Excuse me, I forgot to paste in the u-boot output:
=> nand info
 
Device 0: nand0, sector size 128 KiB
=> nand erase
 
NAND erase: device 0 whole chip
Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
nand_read_bbt: Bad block at 0x0000006c0000
nand_read_bbt: Bad block at 0x00000ab40000
nand_read_bbt: Bad block at 0x00000d020000
nand_read_bbt: Bad block at 0x00000d600000
nand_read_bbt: Bad block at 0x0000135a0000
nand_read_bbt: Bad block at 0x00001d500000
nand_read_bbt: Bad block at 0x00001d520000
nand_read_bbt: Bad block at 0x00001d600000
nand_read_bbt: Bad block at 0x00001d620000
nand_read_bbt: Bad block at 0x00001dea0000
nand_read_bbt: Bad block at 0x0000299e0000
nand_read_bbt: Bad block at 0x00002b8e0000
nand_read_bbt: Bad block at 0x00002cc40000
nand_read_bbt: Bad block at 0x00003b780000
nand_read_bbt: Bad block at 0x00003fb40000
nand_read_bbt: Bad block at 0x00003fbc0000
Skipping bad block at  0x006c0000
Skipping bad block at  0x0ab40000
Skipping bad block at  0x0d020000
Skipping bad block at  0x0d600000
Skipping bad block at  0x135a0000
Skipping bad block at  0x1d500000
Skipping bad block at  0x1d520000
Skipping bad block at  0x1d600000
Skipping bad block at  0x1d620000
Skipping bad block at  0x1dea0000
Skipping bad block at  0x299e0000
Skipping bad block at  0x2b8e0000
Skipping bad block at  0x2cc40000
Skipping bad block at  0x3b780000
Skipping bad block at  0x3fb40000
Skipping bad block at  0x3fbc0000
Skipping bad block at  0x3ff80000
Skipping bad block at  0x3ffa0000
Skipping bad block at  0x3ffc0000
Skipping bad block at  0x3ffe0000
 
OK
=> mtdparts
 
device nand0 <nand>, # parts = 1
 #: name                size            offset          mask_flags
 0: rootfs              0x04000000      0x00000000      0
 
active partition: nand0,0 - (rootfs) 0x04000000 @ 0x00000000
 
defaults:
mtdids  : nand0=nand
mtdparts: mtdparts=nand:64m(rootfs)
=> ubi part rootfs
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000004000000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: empty MTD device detected
UBI: create volume table (copy #1)
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 0:512,
written 0 bytes
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 1:512,
written 0 bytes
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 2:512,
written 0 bytes
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 3:512,
written 0 bytes
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 4:512,
written 0 bytes
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 5:512,
written 0 bytes
UBI error: ubi_init: cannot attach mtd1
UBI error: ubi_init: UBI error: cannot initialize UBI, error -5
UBI init error -5
exit not allowed from main input shell.
=> nand info
 
Device 0: nand0, sector size 128 KiB
=> ver
 
U-Boot 2010.03-00150-ga47a12b-dirty (Apr 23 2010 - 06:22:06)
=>
 
Thanks,
Edward

________________________________

From: Ewer, Edward E 
Sent: Friday, April 23, 2010 6:39 AM
To: 'u-boot at lists.denx.de'
Subject: UBI partigion in u-boot


I'm using a MPC8572DS evaluation system and attempting to set up a UBI
file system from u-boot.  I've seen a similar thread with similar errors
but my error isn't being caused by the define CONFIG_SYS_MALLOC_LEN
being too small (it's set for 1M).
 
I'm just starting with UBI/UBIFS and hoping someone could give me some
insight into what may be causing these errors.
 
Here is my u-boot output:
 
 
 
Thanks,
Edward