[U-Boot] [PATCH v4 0/8] Add support for PDM360NG board

[Wolfgang Denk]

Dear Anatolij Gustschin,

In message <1272130031-26230-1-git-send-email-agust at denx.de> you wrote:
> These are reworked/rebased patches for PDM360NG
> board support. I expect them to be applied to u-boot-mpc5xxx
> branch (after removing four already applied patches
> from earlier version in the u-boot-mpc5xxx tree).
> 
> Changes since previous v3 are described in each
> affected patch. First patch is new in this v4
> series.
> 
> Anatolij Gustschin (8):
>   serial: struct serial_device: add uninit() entry for drivers

Applied to mainline repo, "master" branch.

>   mpc512x: add multi serial PSC support
>   mpc5121: add PSC serial communication routines
>   mpc512x: make MEM IO Control configuration a board config option
>   mpc5121: determine RAM size using get_ram_size()
>   mpc5121: add support for PDM360NG board
>   mpc5121: add common post_word_load/store code
>   mpc5121: pdm360ng: add coprocessor POST

Applied to u-boot-mpc5xxx repo, "master" branch.


Thanks.


Um... my understanding is that the post_word_* stuff will be cleaned
up later?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Houston, Tranquillity Base here.  The Eagle has landed.
                                                    -- Neil Armstrong