[U-Boot] [PULL] Please pull u-boot-mpc5xxx.git

[Wolfgang Denk]

The following changes since commit fbb0030e3894119c089256f16626edd166c7629c:
  Anatolij Gustschin (1):
        serial: struct serial_device: add uninit() entry for drivers

are available in the git repository at:

  git://git.denx.de/u-boot-mpc5xxx.git master

Anatolij Gustschin (7):
      mpc512x: add multi serial PSC support
      mpc5121: add PSC serial communication routines
      mpc512x: make MEM IO Control configuration a board config option
      mpc5121: determine RAM size using get_ram_size()
      mpc5121: add support for PDM360NG board
      mpc5121: add common post_word_load/store code
      mpc5121: pdm360ng: add coprocessor POST

 MAINTAINERS                            |    4 +
 MAKEALL                                |    1 +
 Makefile                               |    3 +
 arch/powerpc/cpu/mpc512x/Makefile      |    1 +
 arch/powerpc/cpu/mpc512x/common.c      |   25 ++
 arch/powerpc/cpu/mpc512x/diu.c         |   12 +-
 arch/powerpc/cpu/mpc512x/fixed_sdram.c |    9 +-
 arch/powerpc/cpu/mpc512x/serial.c      |  353 ++++++++++++++++--
 arch/powerpc/include/asm/immap_512x.h  |  117 +++---
 board/freescale/common/fsl_diu_fb.c    |   29 ++-
 board/pdm360ng/Makefile                |   51 +++
 board/pdm360ng/config.mk               |   24 ++
 board/pdm360ng/pdm360ng.c              |  650 ++++++++++++++++++++++++++++++++
 common/serial.c                        |   23 ++
 include/configs/aria.h                 |    3 +
 include/configs/mecp5123.h             |    3 +
 include/configs/mpc5121-common.h       |   53 +++
 include/configs/mpc5121ads.h           |    3 +
 include/configs/pdm360ng.h             |  486 ++++++++++++++++++++++++
 include/post.h                         |    1 +
 include/serial.h                       |   14 +
 post/board/pdm360ng/Makefile           |   29 ++
 post/board/pdm360ng/coproc_com.c       |   97 +++++
 post/tests.c                           |   13 +
 24 files changed, 1911 insertions(+), 93 deletions(-)
 create mode 100644 arch/powerpc/cpu/mpc512x/common.c
 create mode 100644 board/pdm360ng/Makefile
 create mode 100644 board/pdm360ng/config.mk
 create mode 100644 board/pdm360ng/pdm360ng.c
 create mode 100644 include/configs/mpc5121-common.h
 create mode 100644 include/configs/pdm360ng.h
 create mode 100644 post/board/pdm360ng/Makefile
 create mode 100644 post/board/pdm360ng/coproc_com.c

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If it went on at this rate, in several billion  years  he'd  be  rich
beyond his wildest dreams!            - Terry Pratchett, _Soul Music_