[U-Boot] Splash screen problem

[Wolfgang Denk]

Dear =?iso-8859-2?Q?Radovan=20V=E1pen=EDk?=,

please make sure to keep the mailing list on Cc:

In message <56290.4066.1012-16596-130053893-1272541277 at seznam.cz> you wrote:
> Yes, it is bad address :-)
> Settings of splashimage:
> splashimage=nand read 25000000 C0000 20000

Well, this cannot work.

As documented, "splashimage" is supposed to hold the address where the
image is stored in memory.

> The enviroment variable "splashimage" runs the command to read from NAND,
> but i don't know how to tell (return) to splashimage the address of
> bitmap after reading from NAND.

The command above reads the image to address 25000000 in RAM, so you
should define

	=> setenv splashimage 25000000

Of course the reading from NAND must be done somewhere else, for
example as part of a "preboot" command.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The bad reputation UNIX has gotten is totally undeserved, laid on by
people who don't understand, who have not gotten in there  and  tried
anything."          -- Jim Joyce, owner of Jim Joyce's UNIX Bookstore