[U-Boot] [PATCH 1/8] powerpc/85xx: do not reloc l2srbar if CONFIG_FLASH_BASE is not defined

[Haiying.Wang at freescale.com]

From: Haiying Wang <Haiying.Wang at freescale.com>

This fixes the compiling error for the board  which doesn't have NOR flash
(so CONFIG_FLASH_BASE is not defined)

Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 27236a0..4b8faa5 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -327,7 +327,7 @@ int cpu_init_r(void)
 	if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
 		puts("already enabled");
 		l2srbar = l2cache->l2srbar0;
-#ifdef CONFIG_SYS_INIT_L2_ADDR
+#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
 		if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
 				&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
 			l2srbar = CONFIG_SYS_INIT_L2_ADDR;
-- 
1.7.3.1.50.g1e633