[U-Boot] OMAP: Hang after memory init, was: [STATUS] v2010.12-rc2 released

[Albert ARIBAUD]

Le 04/12/2010 07:51, Dirk Behme a écrit :
> On 03.12.2010 22:11, Carlo Caione wrote:
>> On Thu, 2010-12-02 at 20:40 -0800, Prafulla Wadaskar wrote:
>>>
>>>> -----Original Message-----
>>>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>>>> On Behalf Of Carlo Caione
>>>> Sent: Friday, December 03, 2010 3:11 AM
>>>> To: U-Boot at lists.denx.de
>>>> Subject: Re: [U-Boot] [STATUS] v2010.12-rc2 released
>>>>
>>>>> Some of the times, the boot hung after printing DRAM: 128 MiB,
>>>>> but never did it hang without printing anything.
>>>>
>>>> The same here.
>>>> Beagleboard xM rev.A hangs after DRAM: 256 MiB
>>>
>>> For fix this, needs to change global variables in timer.c
>>> REF: http://lists.denx.de/pipermail/u-boot/2010-December/082834.html
>>
>> Applied but nothing is changed:
>>
>> Texas Instruments X-Loader 1.4.4ss (Dec  2 2010 - 21:40:58)
>> Beagle xM Rev A
>> Reading boot sector
>> Loading u-boot.bin from mmc
>>
>>
>> U-Boot 2010.12-rc2-00029-g49733aa-dirty (Dec 03 2010 - 22:05:44)
>>
>> OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
>> OMAP3 Beagle board + LPDDR/NAND
>> I2C:   ready
>> DRAM:  512 MiB
>
> I'm not totally sure, so sorry if I'm wrong. But:
>
> I understood the link given by Prafulla above only as a reference what
> has to be done to fix the OMAP hang. I don't think the given patch
> fixes the issue itself. Most probably we additionally need something like
>
> http://lists.denx.de/pipermail/u-boot/2010-December/082965.html
>
> for OMAP, too?

Also make sure that the r8 register is not trashed by the relocation 
code in the start.S used for this board. See Andreas' patch for that.

> Best regards
>
> Dirk

Amicalement,
-- 
Albert.