[U-Boot] [PATCH] OMAP3: SPI driver
Dirk Behme
dirk.behme at googlemail.com
Sat Dec 4 22:39:27 CET 2010
CC: Ruslan N. Araslanov <byaaka at yandex.ru>
Signed-off-by: Ruslan Araslanov <ruslan.araslanov at vitecmm.com>
---
I got this patch in a private mail from Ruslan with the comment:
"I have some changes in this driver. It works with SPI flash memory and
with other devices."
He seems to be too shy to send it himself (?) So I just send it, maybe it's
useful for somebody.
If you like to comment on this patch, please send comments or questions
directly to Ruslan.
Note: Checkpatch still complains about some lines over 80 characters.
I think this is acceptable, fixing this would make the style
even worse.
Thanks
Dirk
drivers/spi/Makefile | 1
drivers/spi/omap3_spi.c | 352 +++++++++++++++++++++++++++++++++++++++++
drivers/spi/omap3_spi.h | 117 +++++++++++++
include/configs/omap3_beagle.h | 2
4 files changed, 472 insertions(+)
Index: u-boot.git/drivers/spi/Makefile
===================================================================
--- u-boot.git.orig/drivers/spi/Makefile
+++ u-boot.git/drivers/spi/Makefile
@@ -35,6 +35,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
+COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
COBJS := $(COBJS-y)
Index: u-boot.git/include/configs/omap3_beagle.h
===================================================================
--- u-boot.git.orig/include/configs/omap3_beagle.h
+++ u-boot.git/include/configs/omap3_beagle.h
@@ -335,4 +335,6 @@ extern unsigned int boot_flash_type;
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
+#define CONFIG_OMAP3_SPI
+
#endif /* __CONFIG_H */
Index: u-boot.git/drivers/spi/omap3_spi.c
===================================================================
--- /dev/null
+++ u-boot.git/drivers/spi/omap3_spi.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (C) 2010 Dirk Behme <dirk.behme at googlemail.com>
+ *
+ * Driver for McSPI controller on OMAP3. Based on davinci_spi.c
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Parts taken from linux/drivers/spi/omap2_mcspi.c
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * Modified by Ruslan Araslanov <ruslan.araslanov at vitecmm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "omap3_spi.h"
+
+#define WORD_LEN 8
+#define SPI_WAIT_TIMEOUT 3000000;
+
+static void spi_reset(struct omap3_spi_slave *ds)
+{
+ unsigned int tmp;
+
+ writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig);
+ do {
+ tmp = readl(&ds->regs->sysstatus);
+ } while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
+
+ writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
+ OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
+ OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
+ &ds->regs->sysconfig);
+
+ writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable);
+}
+
+void spi_init()
+{
+ /* do nothing */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct omap3_spi_slave *ds;
+
+ ds = malloc(sizeof(struct omap3_spi_slave));
+ if (!ds) {
+ printf("SPI error: malloc of SPI structure failed\n");
+ return NULL;
+ }
+
+ /*
+ * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
+ * with different number of chip selects (CS, channels):
+ * McSPI1 has 4 CS (bus 0, cs 0 - 3)
+ * McSPI2 has 2 CS (bus 1, cs 0 - 1)
+ * McSPI3 has 2 CS (bus 2, cs 0 - 1)
+ * McSPI4 has 1 CS (bus 3, cs 0)
+ */
+
+ switch (bus) {
+ case 0:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
+ break;
+ case 1:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
+ break;
+ case 2:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
+ break;
+ case 3:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
+ break;
+ default:
+ printf("SPI error: unsupported bus %i. \
+ Supported busses 0 - 3\n", bus);
+ return NULL;
+ }
+ ds->slave.bus = bus;
+
+ if (((bus == 0) && (cs > 3)) ||
+ ((bus == 1) && (cs > 1)) ||
+ ((bus == 2) && (cs > 1)) ||
+ ((bus == 3) && (cs > 0))) {
+ printf("SPI error: unsupported chip select %i \
+ on bus %i\n", cs, bus);
+ return NULL;
+ }
+ ds->slave.cs = cs;
+
+ if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
+ printf("SPI error: unsupported frequency %i Hz. \
+ Max frequency is 48 Mhz\n", max_hz);
+ return NULL;
+ }
+ ds->freq = max_hz;
+
+ if (mode > SPI_MODE_3) {
+ printf("SPI error: unsupported SPI mode %i\n", mode);
+ return NULL;
+ }
+ ds->mode = mode;
+
+ return &ds->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+
+ free(ds);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ unsigned int conf, div = 0;
+
+ /* McSPI global module configuration */
+
+ /*
+ * setup when switching from (reset default) slave mode
+ * to single-channel master mode
+ */
+ spi_reset(ds);
+ conf = readl(&ds->regs->modulctrl);
+ conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
+ conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
+ writel(conf, &ds->regs->modulctrl);
+
+ /* McSPI individual channel configuration */
+
+ /* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
+ if (ds->freq) {
+ while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
+ > ds->freq)
+ div++;
+ } else
+ div = 0xC;
+
+ conf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
+ * REVISIT: this controller could support SPI_3WIRE mode.
+ */
+ conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
+ conf |= OMAP3_MCSPI_CHCONF_DPE0;
+
+ /* wordlength */
+ conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
+ conf |= (WORD_LEN - 1) << 7;
+
+ /* set chipselect polarity; manage with FORCE */
+ if (!(ds->mode & SPI_CS_HIGH))
+ conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
+ else
+ conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
+
+ /* set clock divisor */
+ conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
+ conf |= div << 2;
+
+ /* set SPI mode 0..3 */
+ if (ds->mode & SPI_CPOL)
+ conf |= OMAP3_MCSPI_CHCONF_POL;
+ else
+ conf &= ~OMAP3_MCSPI_CHCONF_POL;
+ if (ds->mode & SPI_CPHA)
+ conf |= OMAP3_MCSPI_CHCONF_PHA;
+ else
+ conf &= ~OMAP3_MCSPI_CHCONF_PHA;
+
+ /* Transmit & receive mode */
+ conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+
+ writel(conf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+
+ /* Reset the SPI hardware */
+ spi_reset(ds);
+}
+
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+ unsigned long flags)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ int i;
+ int timeout = SPI_WAIT_TIMEOUT;
+ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ if (flags & SPI_XFER_BEGIN)
+ writel(OMAP3_MCSPI_CHCTRL_EN,
+ &ds->regs->channel[ds->slave.cs].chctrl);
+
+ chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+ chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
+ chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ for (i = 0; i < len; i++) {
+ /* wait till TX register is empty (TXS == 1) */
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_TXS)) {
+ if (--timeout <= 0) {
+ printf("SPI TXS timed out, status=0x%08x\n",
+ readl(&ds->regs->channel[ds->slave.cs].chstat));
+ return -1;
+ }
+ }
+ /* Write the data */
+ writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
+ }
+
+ if (flags & SPI_XFER_END) {
+ /* wait to finish of transfer */
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_EOT));
+
+ chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+ }
+ return 0;
+}
+
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+ unsigned long flags)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ int i;
+ int timeout = SPI_WAIT_TIMEOUT;
+ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ if (flags & SPI_XFER_BEGIN)
+ writel(OMAP3_MCSPI_CHCTRL_EN,
+ &ds->regs->channel[ds->slave.cs].chctrl);
+
+ chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+ chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
+ chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ writel(0, &ds->regs->channel[ds->slave.cs].tx);
+
+ for (i = 0; i < len; i++) {
+ /* Wait till RX register contains data (RXS == 1) */
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_RXS)) {
+ if (--timeout <= 0) {
+ printf("SPI RXS timed out, status=0x%08x\n",
+ readl(&ds->regs->channel[ds->slave.cs].chstat));
+ return -1;
+ }
+ }
+ /* Read the data */
+ rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
+ }
+
+ if (flags & SPI_XFER_END) {
+ chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+ }
+
+ return 0;
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ unsigned int len;
+ const u8 *txp = dout;
+ u8 *rxp = din;
+ int ret = -1;
+
+ if (bitlen % 8)
+ return -1;
+
+ len = bitlen / 8;
+
+ if (bitlen == 0) { /* only change CS */
+ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ if (flags & SPI_XFER_BEGIN) {
+ writel(OMAP3_MCSPI_CHCTRL_EN,
+ &ds->regs->channel[ds->slave.cs].chctrl);
+ chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf,
+ &ds->regs->channel[ds->slave.cs].chconf);
+ }
+ if (flags & SPI_XFER_END) {
+ chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf,
+ &ds->regs->channel[ds->slave.cs].chconf);
+ writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+ }
+ ret = 0;
+ } else {
+ if (dout != NULL)
+ ret = omap3_spi_write(slave, len, txp, flags);
+
+ if (din != NULL)
+ ret = omap3_spi_read(slave, len, rxp, flags);
+ }
+ return ret;
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+}
Index: u-boot.git/drivers/spi/omap3_spi.h
===================================================================
--- /dev/null
+++ u-boot.git/drivers/spi/omap3_spi.h
@@ -0,0 +1,117 @@
+/*
+ * Register definitions for the OMAP3 McSPI Controller
+ *
+ * Copyright (C) 2010 Dirk Behme <dirk.behme at googlemail.com>
+ *
+ * Parts taken from linux/drivers/spi/omap2_mcspi.c
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * Modified by Ruslan Araslanov <ruslan.araslanov at vitecmm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP3_SPI_H_
+#define _OMAP3_SPI_H_
+
+#define OMAP3_MCSPI1_BASE 0x48098000
+#define OMAP3_MCSPI2_BASE 0x4809A000
+#define OMAP3_MCSPI3_BASE 0x480B8000
+#define OMAP3_MCSPI4_BASE 0x480BA000
+
+#define OMAP3_MCSPI_MAX_FREQ 48000000
+
+/* OMAP3 McSPI registers */
+struct mcspi_channel {
+ unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
+ unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
+ unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
+ unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
+ unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
+};
+
+struct mcspi {
+ unsigned char res1[0x10];
+ unsigned int sysconfig; /* 0x10 */
+ unsigned int sysstatus; /* 0x14 */
+ unsigned int irqstatus; /* 0x18 */
+ unsigned int irqenable; /* 0x1C */
+ unsigned int wakeupenable; /* 0x20 */
+ unsigned int syst; /* 0x24 */
+ unsigned int modulctrl; /* 0x28 */
+ struct mcspi_channel channel[4]; /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
+ /* channel1: 0x40 - 0x50, bus 0 & 1 */
+ /* channel2: 0x54 - 0x64, bus 0 & 1 */
+ /* channel3: 0x68 - 0x78, bus 0 */
+};
+
+/* per-register bitmasks */
+#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
+#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
+#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
+
+#define OMAP3_MCSPI_SYSSTATUS_RESETDONE (1 << 0)
+
+#define OMAP3_MCSPI_MODULCTRL_SINGLE (1 << 0)
+#define OMAP3_MCSPI_MODULCTRL_MS (1 << 2)
+#define OMAP3_MCSPI_MODULCTRL_STEST (1 << 3)
+
+#define OMAP3_MCSPI_CHCONF_PHA (1 << 0)
+#define OMAP3_MCSPI_CHCONF_POL (1 << 1)
+#define OMAP3_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
+#define OMAP3_MCSPI_CHCONF_EPOL (1 << 6)
+#define OMAP3_MCSPI_CHCONF_WL_MASK (0x1f << 7)
+#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY (0x01 << 12)
+#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY (0x02 << 12)
+#define OMAP3_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
+#define OMAP3_MCSPI_CHCONF_DMAW (1 << 14)
+#define OMAP3_MCSPI_CHCONF_DMAR (1 << 15)
+#define OMAP3_MCSPI_CHCONF_DPE0 (1 << 16)
+#define OMAP3_MCSPI_CHCONF_DPE1 (1 << 17)
+#define OMAP3_MCSPI_CHCONF_IS (1 << 18)
+#define OMAP3_MCSPI_CHCONF_TURBO (1 << 19)
+#define OMAP3_MCSPI_CHCONF_FORCE (1 << 20)
+
+#define OMAP3_MCSPI_CHSTAT_RXS (1 << 0)
+#define OMAP3_MCSPI_CHSTAT_TXS (1 << 1)
+#define OMAP3_MCSPI_CHSTAT_EOT (1 << 2)
+
+#define OMAP3_MCSPI_CHCTRL_EN (1 << 0)
+
+#define OMAP3_MCSPI_WAKEUPENABLE_WKEN (1 << 0)
+
+struct omap3_spi_slave {
+ struct spi_slave slave;
+ struct mcspi *regs;
+ unsigned int freq;
+ unsigned int mode;
+};
+
+static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct omap3_spi_slave, slave);
+}
+
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+ unsigned long flags);
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+ unsigned long flags);
+
+#endif /* _OMAP3_SPI_H_ */
More information about the U-Boot
mailing list