[U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb

[Albert ARIBAUD]

Le 05/12/2010 02:27, Clint Adams a écrit :
> Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my
> GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
>
> What might be the problem here?

There are a couple of fixes to ARM boards which were not in 2010.12-rc2 
and may not even be on master actually. Look up Andreas' patches for r8 
preservation, notably. These may not solve your problem but they're 
needed anyway.

Amicalement,
-- 
Albert.