[U-Boot] OMAP3: EVM: Linker errors across tool chain versions

[Albert ARIBAUD]

Hi Dirk,

Le 12/12/2010 09:25, Dirk Behme a écrit :
>
> What's the status of the linker errors across tool chain versions seen
> by building the 'omap3_evm' board?
>
> This was already discussed in the threads [1] and [2], but it seems to
> me that there was no acceptable fix, yet?
>
> E.g. with CodeSourcery's tool chain 2009q1-203 I get
>
> arm-none-linux-gnueabi-ld: section .bss [8003f5e0 -> 8007e33f] overlaps
> section .rel.dyn [8003f5e0 -> 80044e6f]
> arm-none-linux-gnueabi-ld: section .dynsym [80044e70 -> 80044f0f]
> overlaps section .bss [8003f5e0 -> 8007e33f]
> arm-none-linux-gnueabi-ld: u-boot: section .bss vma 0x8003f5e0 overlaps
> previous sections
>
> What we learned from [2] is that using [3] fixes the build (at least for
> me with the tool chain mentioned above). I.e. converting
> omap3_evm_version from u8 to int
>
> -static u8 omap3_evm_version;
> +static int omap3_evm_version;
>
> makes the issue disappear.
>
> But if I understood the discussion correctly, this is no acceptable fix
> and can be used only as debug help (?).
>
> Any further hints?

Three comments at least:

1. I personally would agree with the change to int, but since Wolfgang 
considers it a workaround to the linker issue, I won't accept it either.

2. IIRC, the linker emits a warning, not an error. We can live some time 
with a warning if it is documented and it is being worked on.

3. I did offer to try and find a minimal test case (one .c file, one 
.lds file, one simple command line) to cause the warning and submit it 
to the binutils list, but haven't had time so far.

> Thanks
>
> Dirk

Amicalement,
-- 
Albert.