[U-Boot] [PATCH V2 09/12] mpc85xx boards: initdram() cleanup/bugfix

[Becky Bruce]

On Dec 15, 2010, at 5:25 PM, Paul Gortmaker wrote:

> On Mon, Dec 13, 2010 at 9:12 PM, Paul Gortmaker
> <paul.gortmaker at windriver.com> wrote:
>> 
>> I'm not anywhere near the office at the moment, but later in the week
>> I'll see if I can find a board (or two?) to test on.
>> 
>> Paul.
> 
> Seems OK for POST test on an old MPC8540ADS.  The info printed
> for SDRAM kind of interjects itself into the DRAM info, but that is lar
> gely cosmetic.

I'll look at making this prettier.... I like pretty.

> 
> Testing details of the base commit I used to "am" your patches to are
> below.  Feel free to add a Tested-by: from me if you want.

Thanks!
-Becky

> 
> P.
> --------------------------------------
> => reset
> 
> 
> U-Boot 2010.12-rc1-00038-g04af960 (Dec 15 2010 - 18:09:59)
> 
> CPU:   8540, Version: 2.0, (0x80300020)
> Core:  Unknown, Version: 2.0, (0x80200020)
> Clock Configuration:
>       CPU0:825  MHz,
>       CCB:330  MHz,
>       DDR:165  MHz (330 MT/s data rate), LBC:82.500 MHz
> L1:    D-cache 32 kB enabled
>       I-cache 32 kB enabled
> Board: ADS
>    PCI1: 32 bit, 33 MHz (compiled)
> I2C:   ready
> DRAM:      SDRAM: 64 MiB
> 256 MiB (DDR1, 64-bit, CL=2.5, ECC off)
> FLASH: 16 MiB
> L2:    256 KB already enabled
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> Net:   TSEC0, TSEC1, FEC
> Hit any key to stop autoboot:  0
> =>
> 
> --------------------
> 
> u-boot$git merge-base master HEAD
> 0c0892be0d93a5a892b93739c5eb3bf692fed4ff
> u-boot$git describe
> v2010.12-rc1-38-g04af960
> u-boot$git request-pull master .
> The following changes since commit 0c0892be0d93a5a892b93739c5eb3bf692fed4ff:
> 
>  Merge branch 'master' of git://git.denx.de/u-boot-marvell
> (2010-10-29 22:03:00 +0200)
> 
> are available in the git repository at:
> 
>  . bb-dram
> 
> Becky Bruce (12):
>      mpc8540eval: Split initdram() into initdram() and sdram_init()
>      tqm85xx: create fixed_sdram() to do sdram setup
>      mpc85xx/tlb.c: Allow platforms to specify wimge bits
>      socrates: rename sdram_setup fixed_sdram()
>      mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition
>      PM854: rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE
>      PM856: Rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE
>      MPC8568/MPC8569: Remove CONFIG_DDR_DLL define
>      mpc85xx boards: initdram() cleanup/bugfix
>      85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN
>      mpc85xx: rename sdram_init() lbc_sdram_init()
>      MPC8xxx DDR: align informational prints