[U-Boot] [PATCH V2 09/12] mpc85xx boards: initdram() cleanup/bugfix

[Paul Gortmaker]

On Mon, Dec 13, 2010 at 9:12 PM, Paul Gortmaker
<paul.gortmaker at windriver.com> wrote:
>
> I'm not anywhere near the office at the moment, but later in the week
> I'll see if I can find a board (or two?) to test on.
>
> Paul.

Seems OK for POST test on an old MPC8540ADS.  The info printed
for SDRAM kind of interjects itself into the DRAM info, but that is largely
cosmetic.

Testing details of the base commit I used to "am" your patches to are
below.  Feel free to add a Tested-by: from me if you want.

P.
--------------------------------------
=> reset


U-Boot 2010.12-rc1-00038-g04af960 (Dec 15 2010 - 18:09:59)

CPU:   8540, Version: 2.0, (0x80300020)
Core:  Unknown, Version: 2.0, (0x80200020)
Clock Configuration:
       CPU0:825  MHz,
       CCB:330  MHz,
       DDR:165  MHz (330 MT/s data rate), LBC:82.500 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
Board: ADS
    PCI1: 32 bit, 33 MHz (compiled)
I2C:   ready
DRAM:      SDRAM: 64 MiB
256 MiB (DDR1, 64-bit, CL=2.5, ECC off)
FLASH: 16 MiB
L2:    256 KB already enabled
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   TSEC0, TSEC1, FEC
Hit any key to stop autoboot:  0
=>

--------------------

u-boot$git merge-base master HEAD
0c0892be0d93a5a892b93739c5eb3bf692fed4ff
u-boot$git describe
v2010.12-rc1-38-g04af960
u-boot$git request-pull master .
The following changes since commit 0c0892be0d93a5a892b93739c5eb3bf692fed4ff:

  Merge branch 'master' of git://git.denx.de/u-boot-marvell
(2010-10-29 22:03:00 +0200)

are available in the git repository at:

  . bb-dram

Becky Bruce (12):
      mpc8540eval: Split initdram() into initdram() and sdram_init()
      tqm85xx: create fixed_sdram() to do sdram setup
      mpc85xx/tlb.c: Allow platforms to specify wimge bits
      socrates: rename sdram_setup fixed_sdram()
      mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition
      PM854: rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE
      PM856: Rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE
      MPC8568/MPC8569: Remove CONFIG_DDR_DLL define
      mpc85xx boards: initdram() cleanup/bugfix
      85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN
      mpc85xx: rename sdram_init() lbc_sdram_init()
      MPC8xxx DDR: align informational prints