[U-Boot] NEC OHCI chip bug

[gavinguo at andestech.com]

Hi Martin,

> are you sure it is that NEC bug? We had a similar error message when the 
> PCI bridge was not properly setup and the OHCI could not access RAM 
> through PCI (DMA), hence the "unrecoverable error".

The bus/dev/func/ number of OHCI host controller are 0/8/0 and 0/8/1, bus number is 0 of both devices. I think that PCI bridge need setup if the bus number is other than 0? Is that correct?

Thanks

Regards,
Gavin