[U-Boot] [PATCH 0/5] Add support for Freescale MX53

[Jason Liu]

The following patch set add support for Freescale MX53

Jason Liu (5):
  MX5: Add initial support for MX53
  serial_mxc: add support for MX53 processor
  fec_mxc: add support for MX53 processor
  mxc_i2c: add support for MX53 processor
  MX5:MX53: add initial support for MX53EVK board

 MAINTAINERS                                 |    3 +
 arch/arm/cpu/armv7/mx5/iomux.c              |   30 ++-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S      |   92 ++++---
 arch/arm/cpu/armv7/mx5/soc.c                |   14 +-
 arch/arm/cpu/armv7/u-boot.lds               |    1 +
 arch/arm/include/asm/arch-mx5/asm-offsets.h |    5 +
 arch/arm/include/asm/arch-mx5/imx-regs.h    |   78 ++---
 arch/arm/include/asm/arch-mx5/iomux.h       |  102 ------
 arch/arm/include/asm/arch-mx5/mx5x_pins.h   |  469 ++++++++++++++++++++++++++-
 board/freescale/mx53evk/Makefile            |   49 +++
 board/freescale/mx53evk/config.mk           |   23 ++
 board/freescale/mx53evk/ivt.S               |  289 +++++++++++++++++
 board/freescale/mx53evk/mx53evk.c           |  412 +++++++++++++++++++++++
 boards.cfg                                  |    1 +
 drivers/i2c/mxc_i2c.c                       |   18 +-
 drivers/net/fec_mxc.c                       |    2 +-
 drivers/net/fec_mxc.h                       |    4 +-
 drivers/serial/serial_mxc.c                 |    6 +
 include/configs/mx51evk.h                   |    3 +-
 include/configs/mx53evk.h                   |  213 ++++++++++++
 20 files changed, 1607 insertions(+), 207 deletions(-)
 mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/iomux.c
 mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S
 mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/imx-regs.h
 mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h
 create mode 100755 board/freescale/mx53evk/Makefile
 create mode 100755 board/freescale/mx53evk/config.mk
 create mode 100755 board/freescale/mx53evk/ivt.S
 create mode 100755 board/freescale/mx53evk/mx53evk.c
 mode change 100644 => 100755 drivers/i2c/mxc_i2c.c
 mode change 100644 => 100755 include/configs/mx51evk.h
 create mode 100755 include/configs/mx53evk.h