[U-Boot] [PULL] [NEXT] u-boot-arm.git next

[Wolfgang Denk]

The following changes since commit 006915fbb0e3c1c9927fe32c4e92cb011f8499e7:

  Merge branch 'master' of ../master into next (2010-12-16 23:00:53 +0100)

are available in the git repository at:

  git://git.denx.de/u-boot-arm.git next

Prafulla Wadaskar (7):
      arm: Add Support for Marvell ARMADA 100 Familiy SoCs
      gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs
      add Multi Function Pin configuration support for ARMADA100
      Serial: ns16550: Add support for CONFIG_SYS_NS16550_IER macro
      Serial: Add UART support for Marvell ARMADA 100 SoCs.
      mv-common.h: Add support for ARMADA100 Platforms
      Armada100: Add Board Support for Marvell Aspenite-DB

Simon Kagstrom (1):
      MAINTAINERS: Transfer openrd_base maintainership to Prafulla Wadaskar

 MAINTAINERS                                     |    6 +-
 MAKEALL                                         |    1 +
 arch/arm/cpu/arm926ejs/armada100/Makefile       |   46 +++++
 arch/arm/cpu/arm926ejs/armada100/cpu.c          |   92 ++++++++++
 arch/arm/cpu/arm926ejs/armada100/dram.c         |  131 ++++++++++++++
 arch/arm/cpu/arm926ejs/armada100/timer.c        |  207 +++++++++++++++++++++++
 arch/arm/include/asm/arch-armada100/armada100.h |  121 +++++++++++++
 arch/arm/include/asm/arch-armada100/cpu.h       |   53 ++++++
 arch/arm/include/asm/arch-armada100/mfp.h       |   67 ++++++++
 board/Marvell/aspenite/Makefile                 |   52 ++++++
 board/Marvell/aspenite/aspenite.c               |   53 ++++++
 boards.cfg                                      |    1 +
 drivers/gpio/Makefile                           |    1 +
 drivers/gpio/mvmfp.c                            |   87 ++++++++++
 drivers/serial/ns16550.c                        |    8 +-
 drivers/serial/serial.c                         |    5 +-
 include/configs/aspenite.h                      |   63 +++++++
 include/configs/mv-common.h                     |   66 ++++++--
 include/mvmfp.h                                 |  100 +++++++++++
 19 files changed, 1136 insertions(+), 24 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/armada100/Makefile
 create mode 100644 arch/arm/cpu/arm926ejs/armada100/cpu.c
 create mode 100644 arch/arm/cpu/arm926ejs/armada100/dram.c
 create mode 100644 arch/arm/cpu/arm926ejs/armada100/timer.c
 create mode 100644 arch/arm/include/asm/arch-armada100/armada100.h
 create mode 100644 arch/arm/include/asm/arch-armada100/cpu.h
 create mode 100644 arch/arm/include/asm/arch-armada100/mfp.h
 create mode 100644 board/Marvell/aspenite/Makefile
 create mode 100644 board/Marvell/aspenite/aspenite.c
 create mode 100644 drivers/gpio/mvmfp.c
 create mode 100644 include/configs/aspenite.h
 create mode 100644 include/mvmfp.h

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The only way to learn a new programming language is by  writing  pro-
grams in it.                                        - Brian Kernighan