[U-Boot] [PATCH] ppc4xx/POST: Change ethernet test loop count to a default of 10

[Stefan Roese]

On Friday 26 November 2010 19:17:40 Stefan Roese wrote:
> This patch changes the PPC4xx ethernet POST loop test count from
> currently 192 (256 - 64) to a default of 10. While doing this the max
> frame size is increased. Each loop run uses a different frame size,
> starting with a max of 1514 bytes, down to 64. The default loop
> count of 10 can be overriden using CONFIG_SYS_POST_ETH_LOOPS in the
> board config header.
> 
> The TEST_NUM loop has been removed as it was never used.
> 
> The main reason for this change is to reduce the boot time on boards
> using this POST test, like the lwmon5 board. This change reduces the
> boot time by about 600ms on the lwmon5 board.

Applied to u-boot-ppc4xx/next. Thanks.
 
Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de