[U-Boot] [PATCH 14/15] powerpc/86xx: Rework SBC8641 pci_init_board to use common FSL PCIe code

[Kumar Gala]

Remove duplicated code in SBC8641 board and utliize the common
fsl_pcie_init_board().  We also now dynamically setup the LAWs for PCI
controllers based on which PCIe controllers are enabled.

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
CC: Paul Gortmaker <paul.gortmaker at windriver.com>
---
 board/sbc8641d/law.c      |    4 ---
 board/sbc8641d/sbc8641d.c |   63 +-------------------------------------------
 2 files changed, 2 insertions(+), 65 deletions(-)

diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index 705e1c2..a6f60ee 100644
--- a/board/sbc8641d/law.c
+++ b/board/sbc8641d/law.c
@@ -49,11 +49,7 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		 LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
 #endif
-	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index 5ee8f73..5c30b26 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -181,70 +181,11 @@ long int fixed_sdram (void)
  * Initialize PCI Devices, report devices found.
  */
 
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
-	{}
-};
-#endif
-
-static struct pci_controller pcie1_hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_mpc86xxcts_config_table
-#endif
-};
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif	/* CONFIG_PCIE2 */
-
-int first_free_busno = 0;
-
 void pci_init_board(void)
 {
-	struct fsl_pci_info pci_info[2];
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
-	uint devdisr = in_be32(&gur->devdisr);
-	int pcie_ep;
-	int num = 0;
-
-#ifdef CONFIG_PCIE1
-	int pcie_configured = is_serdes_configured(PCIE1);
-
-	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
-		SET_STD_PCIE_INFO(pci_info[num], 1);
-		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("PCIE1: connected as %s (base addr %lx)\n",
-			pcie_ep ? "Endpoint" : "Root Complex",
-			pci_info[num].regs);
-		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno);
-	} else {
-		puts("PCIE1: disabled\n");
-	}
-#else
-	puts("PCIE1: disabled\n");
-#endif /* CONFIG_PCIE1 */
-
-#ifdef CONFIG_PCIE2
-
-	SET_STD_PCIE_INFO(pci_info[num], 2);
-	pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-	printf("PCIE2: connected as %s (base addr %lx)\n",
-		pcie_ep ? "Endpoint" : "Root Complex",
-		pci_info[num].regs);
-	first_free_busno = fsl_pci_init_port(&pci_info[num++],
-				&pcie2_hose, first_free_busno);
-#else
-	puts("PCIE2: disabled\n");
-#endif /* CONFIG_PCIE2 */
+	fsl_pcie_init_board(0);
 }
+#endif /* CONFIG_PCI */
 
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-- 
1.6.0.6