[U-Boot] [PATCH 08/15] powerpc/8xxx: Rework XES boards pci_init_board to use common FSL PCIe code
Peter Tyser
ptyser at xes-inc.com
Mon Dec 20 17:49:04 CET 2010
Thanks for the cleanup. What branch should this series be applied to?
And are there prerequisites? I'm having issues applying them to test
and review.
On Fri, 2010-12-17 at 17:50 -0600, Kumar Gala wrote:
> Remove duplicated code in MPC8572 DS board and utliize the common
> fsl_pcie_init_board().
Looks like a copy/paste from the MPC8572.
On all the patches in the series s/utliize/utilize/.
<snip>
> --- a/board/xes/common/fsl_8xxx_pci.c
> +++ b/board/xes/common/fsl_8xxx_pci.c
> @@ -34,15 +34,6 @@
> #ifdef CONFIG_PCI1
> static struct pci_controller pci1_hose;
> #endif
Is there a reason PCI1 wasn't changed over too? I see pci1_hose is
still referenced below, but other boards with a PCI1 don't use similar
code.
> -#ifdef CONFIG_PCIE1
> -static struct pci_controller pcie1_hose;
> -#endif
> -#ifdef CONFIG_PCIE2
> -static struct pci_controller pcie2_hose;
> -#endif
> -#ifdef CONFIG_PCIE3
> -static struct pci_controller pcie3_hose;
> -#endif
<snip>
> diff --git a/board/xes/xpedite520x/law.c b/board/xes/xpedite520x/law.c
> index bbfcb9d..3afb3ae 100644
> --- a/board/xes/xpedite520x/law.c
> +++ b/board/xes/xpedite520x/law.c
> @@ -38,10 +38,6 @@ struct law_entry law_table[] = {
> /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
> SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
> SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
> -#if CONFIG_SYS_PCI1_MEM_PHYS
> - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCI_1),
> - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_1),
> -#endif
> #if CONFIG_SYS_PCI2_MEM_PHYS
> SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_2),
> SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_2),
The PCI2 law can be removed too. Its not currently used on any boards
supported by mainline U-Boot.
Thanks,
Peter
More information about the U-Boot
mailing list