[U-Boot] [PATCH v2 2/3] mxc_i2c: add support for MX53 processor
Albert ARIBAUD
albert.aribaud at free.fr
Wed Dec 22 19:07:12 CET 2010
Le 22/12/2010 14:23, Jason Liu a écrit :
> This patch add I2C support for Freescale MX53 processor
>
> Signed-off-by: Jason Liu<r64343 at freescale.com>
>
> ---
> Changes for v2:
> -address the comments of Heiko, add #if defined(CONFIG_MX31)
> to avoid break MX31 build. Move CONFIG_HARD_I2C to the top
> of the file and fix the error message from:
> #error "define CONFIG_SYS_I2C_PORT to use the I2C driver"
> to #error "define CONFIG_SYS_I2C_MXxx_PORTx to use the I2C driver"
> ---
> drivers/i2c/mxc_i2c.c | 19 +++++++++++++++++--
> 1 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
> old mode 100644
> new mode 100755
> index 8e10fbb..95d27ae
> --- a/drivers/i2c/mxc_i2c.c
> +++ b/drivers/i2c/mxc_i2c.c
> @@ -26,8 +26,14 @@
>
> #if defined(CONFIG_HARD_I2C)
>
> +#ifdef CONFIG_MX31
Can you make this an #if defined() like all others you are adding here?
> #include<asm/arch/mx31.h>
> #include<asm/arch/mx31-regs.h>
> +#endif
> +
> +#if defined(CONFIG_MX53)
> +#include<asm/arch/clock.h>
> +#endif
>
> #define IADR 0x00
> #define IFDR 0x04
> @@ -56,8 +62,12 @@
> #elif defined (CONFIG_SYS_I2C_MX31_PORT3)
> #define I2C_BASE 0x43f84000
> #define I2C_CLK_OFFSET 30
> +#elif defined(CONFIG_SYS_I2C_MX53_PORT1)
> +#define I2C_BASE I2C1_BASE_ADDR
> +#elif defined(CONFIG_SYS_I2C_MX53_PORT2)
> +#define I2C_BASE I2C2_BASE_ADDR
> #else
> -#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
> +#error "define CONFIG_SYS_I2C_MXxx_PORTx to use the I2C driver"
> #endif
>
> #ifdef DEBUG
> @@ -72,11 +82,16 @@ static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
>
> void i2c_init(int speed, int unused)
> {
> - int freq = mx31_get_ipg_clk();
> + int freq;
> int i;
>
> +#ifdef CONFIG_MX31
Ditto, for the sake of homogeneity.
> + freq = mx31_get_ipg_clk();
> /* start the required I2C clock */
> __REG(CCM_CGR0) = __REG(CCM_CGR0) | (3<< I2C_CLK_OFFSET);
> +#else
> + freq = mxc_get_clock(MXC_IPG_PERCLK);
> +#endif
>
> for (i = 0; i< 0x1f; i++)
> if (freq / div[i]<= speed)
Amicalement,
--
Albert.
More information about the U-Boot
mailing list