[U-Boot] Fixing IXP42x boards - some general questions

Michael Schwingen rincewind at discworld.dascon.de
Thu Dec 23 13:23:50 CET 2010


Am 12/23/2010 11:10 AM, schrieb Wolfgang Denk:
>
>> Timer system.
>>  - For IXP, there are two variants of the timer system - one using
>> interrupts, and one without interrupts. Both do not work currently.
>> I have patches that fix the non-interrupt version, changing
>> CONFIG_SYS_HZ from 66666666 to 1000, bringing it in line with what most
>> other ARM platforms do.
> I cannot nomment on this.  Marek?
>
>> What is the preferred way of handling timers? Should CONFIG_SYS_HZ be
>> 1000 or rather the timer clock?
> CONFIG_SYS_HZ must always be defiend as 1000.
Thanks - no problem for IXP42x.

There are a few non-IXP42x boards that have different values:

include/configs/lart.h:110:#define    CONFIG_SYS_HZ           
3686400        /* incrementer freq: 3.6864 MHz */
include/configs/dvlhost.h:91:#define CONFIG_SYS_HZ            3333333
include/configs/impa7.h:112:#define    CONFIG_SYS_HZ            2000   
    /* decrementer freq: 2 kHz */
include/configs/SMN42.h:143:#define    CONFIG_SYS_HZ            2048   
    /* decrementer freq in Hz */
include/configs/colibri_pxa270.h:141:#define    CONFIG_SYS_HZ           
3250000        /* Timer @ 3250000 Hz */
include/configs/lpc2292sodimm.h:110:#define    CONFIG_SYS_HZ           
2048        /* decrementer freq in Hz */
include/configs/mx1fs2.h:80:#define CONFIG_SYS_HZ            3686400   
     /* incrementer freq: 3.6864 MHz */
include/configs/scb9328.h:87:#define CONFIG_SYS_HZ            3686400   
     /* incrementer freq: 3.6864 MHz */
include/configs/mx1ads.h:134:#define CONFIG_SYS_HZ            3686400
include/configs/modnet50.h:116:#define    CONFIG_SYS_HZ           
900        /* decrementer freq: 2 kHz */
include/configs/armadillo.h:111:#define    CONFIG_SYS_HZ           
2000        /* decrementer freq: 2 kHz */
include/configs/assabet.h:113:#define CONFIG_SYS_HZ           
3686400    /* incrementer freq: 3.6864 MHz */
include/configs/lpd7a404-10.h:37:#define CONFIG_SYS_HZ    (508469)
include/configs/palmtc.h:132:#define    CONFIG_SYS_HZ           
3686400        /* Timer @ 3686400 Hz */
include/configs/idmr.h:148:#define CONFIG_SYS_HZ            (50000000 / 64)
include/configs/KAREF.h:303:#define CONFIG_SYS_HZ              100   
     /* decr freq: 1 ms ticks    */
include/configs/gcplus.h:125:#define    CONFIG_SYS_HZ           
3686400        /* incrementer freq: 3.6864 MHz */
include/configs/ep7312.h:113:#define    CONFIG_SYS_HZ            2000   
    /* decrementer freq: 2 kHz */
include/configs/lpd7a400-10.h:37:#define CONFIG_SYS_HZ    (508469)
include/configs/shannon.h:111:#define    CONFIG_SYS_HZ           
3686400        /* incrementer freq: 3.6864 MHz */
include/configs/METROBOX.h:368:#define CONFIG_SYS_HZ              100   
     /* decr freq: 1 ms ticks    */
include/configs/palmld.h:131:#define    CONFIG_SYS_HZ           
3250000        /* Timer @ 3250000 Hz */
include/configs/dnp1110.h:116:#define    CONFIG_SYS_HZ           
3686400        /* incrementer freq: 3.6864 MHz */
include/configs/zipitz2.h:152:#define    CONFIG_SYS_HZ           
3250000        /* Timer @ 3250000 Hz */
include/configs/balloon3.h:103:#define    CONFIG_SYS_HZ           
3250000        /* Timer @ 3250000 Hz */
include/configs/VCMA9.h:179:#define    CONFIG_SYS_HZ            1562500


>
>> What about the Intel reference board (IXDP425)? Previously, I used that
>> one as a reference on how things should be done, but it looks broken, too.
>> I can prepare patches for IXDP425, but I can't currently test them (we
>> should have one at work, but that might take some time).
> I cannot help with that either.  Marek?
If noone else steps up and the board would be removed from u-boot, you
can list me as maintainer, but I can't test too often.

cu
Michael




More information about the U-Boot mailing list