[U-Boot] [PATCH 10/13] update/fix some more IXP42x boards (only compile tested)

Michael Schwingen michael at schwingen.org
Tue Dec 28 13:43:28 CET 2010


Signed-off-by: Michael Schwingen <michael at schwingen.org>
---
 board/ixdp425/config.mk        |    3 ++-
 board/prodrive/pdnb3/config.mk |    2 +-
 boards.cfg                     |    2 +-
 include/configs/ixdp425.h      |   13 ++++++++++---
 include/configs/ixdpg425.h     |    9 ++++++---
 include/configs/pdnb3.h        |    6 ++++++
 6 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
index 509c894..5d6f708 100644
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -1,2 +1,3 @@
 #
-CONFIG_SYS_TEXT_BASE = 0x00f80000
+CONFIG_SYS_TEXT_BASE = 0x50000000
+
diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk
index 817541f..b5e6a4e 100644
--- a/board/prodrive/pdnb3/config.mk
+++ b/board/prodrive/pdnb3/config.mk
@@ -1,2 +1,2 @@
 #
-CONFIG_SYS_TEXT_BASE = 0x01f00000
+CONFIG_SYS_TEXT_BASE = 0x50000000
diff --git a/boards.cfg b/boards.cfg
index 695baca..b0fc38a 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -130,7 +130,7 @@ actux2                       arm         ixp
 actux3                       arm         ixp
 actux4                       arm         ixp
 ixdp425                      arm         ixp
-ixdpg425                     arm         ixp
+ixdpg425                     arm         ixp         ixdp425
 lpd7a400                     arm         lh7a40x     lpd7a40x
 lpd7a404                     arm         lh7a40x     lpd7a40x
 balloon3                     arm         pxa
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 28d41e2..81288b7 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -105,8 +105,10 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 
-#define CONFIG_SYS_HZ                  3333333         /* spec says 66.666 MHz, but it appears to be 33 */
-						/* valid baudrates */
+/* timer clock - 2* OSC_IN system clock */
+#define CONFIG_IXP425_TIMER_CLK                 66666666
+#define CONFIG_SYS_HZ				1000
+
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
@@ -193,7 +195,12 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
 #define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_INIT_SP_ADDR						\
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif  /* __CONFIG_H */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
index 637fd7d..60a2371 100644
--- a/include/configs/ixdpg425.h
+++ b/include/configs/ixdpg425.h
@@ -53,9 +53,6 @@
 /*
  * Misc configuration options
  */
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-#define CONFIG_USE_IRQ          1	/* we need IRQ stuff for timer	*/
-#define CONFIG_TIMER_IRQ
 
 #define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
@@ -115,6 +112,7 @@
 #define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 
+#define CONFIG_IXP425_TIMER_CLK		66666666
 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 						/* valid baudrates */
@@ -248,4 +246,9 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	32
 
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_INIT_SP_ADDR						\
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif  /* __CONFIG_H */
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 33fa6ee..9acb018 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -117,6 +117,7 @@
 #define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 
+#define CONFIG_IXP425_TIMER_CLK		66666666
 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -345,4 +346,9 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	32
 
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_INIT_SP_ADDR        \
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif  /* __CONFIG_H */
-- 
1.7.2.3



More information about the U-Boot mailing list