[U-Boot] [RFC PATCH 0/8] Add nand_spl support for TI OMAP Beagle

[Paulraj, Sandeep]

> 
> This patch series adds the ability to boot a beagle board from
> nand without x-loader.  A future addition will add mmc boot
> support.
> 
> John Rigby (8):
>   NAND: nand_spl/nand_boot.c: add 16-bit and readid support
>   armv7: add nand_spl support
>   OMAP3: and nand_spl support
>   OMAP3: add dram timing constants from x-loader
>   NAND: omap_gpmc.c: add nand_spl support
>   omap3_beagle: add nand_spl support
>   mkimage: Add OMAP boot image support
>   OMAP3: Add ift target to top level Makefile
> 

I will be on vacation till the 20th of January. So there might be a little delay in merging this patch series after the review has taken place.

I suspect we will have to give some time (probably till 2nd week of January) for review in any case as most people are on vacation.

Regards,
Sandeep