[U-Boot] Which all boards does C100 support in Mainline works with.

[Naveen Krishna Ch]

Hi Kang,

On 1 February 2010 20:02, Minkyu Kang <promsoft at gmail.com> wrote:

> Dear Naveen Krishna Ch,
>
> On 1 February 2010 15:34, Naveen Krishna Ch <naveenkrishna.ch at gmail.com>
> wrote:
> > Hi Folks,
> >
> > I would like to know Which all boards
> > are tested with the C100 support in the Mainline.
> >
> > I have a C100 Single, Pop, EVT1, EVT2, EVT0 boards
> >
> > When i build the Mainline u-boot for "smdkc100_config"; make
> > The u-boot.bin is not working out of the box.
>
> Could you please tell me more about "not working"?
> It would be more helpful.
>
I m using Trace32 to flash Uboot.bin on SMDKC100_pop_board (EVT1).
UART console never came up.
I tested this on EVT2 also, UART never came up.

>
> Thanks
> Minkyu Kang
> --
> from. prom.
> www.promsoft.net
>



-- 
Shine bright,
(: Naveen Krishna Ch :)