[U-Boot] [PATCH 3/3] mpc5xxx/cpu_init.c: fix warning: unused variable 'cdm'
Detlev Zundel
dzu at denx.de
Wed Feb 3 13:53:35 CET 2010
Hi Wolfgang,
> Signed-off-by: Wolfgang Denk <wd at denx.de>
Acked-by: Detlev Zundel <dzu at denx.de>
By the way, now that we have a patch touching this stuff on the mailing
list - would anyone object to removing the mgt5100 stuff? If I am not
missing anything, this is not being used anywhere and makes the code
look overly complicated.
Would such a cleanup patch be accepted?
Thanks
Detlev
> ---
> cpu/mpc5xxx/cpu_init.c | 12 +++++++-----
> 1 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
> index 2aa6e1c..560c9b3 100644
> --- a/cpu/mpc5xxx/cpu_init.c
> +++ b/cpu/mpc5xxx/cpu_init.c
> @@ -40,12 +40,14 @@ void cpu_init_f (void)
> (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
> volatile struct mpc5xxx_lpb *lpb =
> (struct mpc5xxx_lpb *) MPC5XXX_LPB;
> - volatile struct mpc5xxx_cdm *cdm =
> - (struct mpc5xxx_cdm *) MPC5XXX_CDM;
> volatile struct mpc5xxx_gpio *gpio =
> (struct mpc5xxx_gpio *) MPC5XXX_GPIO;
> volatile struct mpc5xxx_xlb *xlb =
> (struct mpc5xxx_xlb *) MPC5XXX_XLBARB;
> +#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
> + volatile struct mpc5xxx_cdm *cdm =
> + (struct mpc5xxx_cdm *) MPC5XXX_CDM;
> +#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
> #if defined(CONFIG_WATCHDOG)
> volatile struct mpc5xxx_gpt *gpt0 =
> (struct mpc5xxx_gpt *) MPC5XXX_GPT;
> @@ -187,11 +189,11 @@ void cpu_init_f (void)
>
> # if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
> /* Motorola reports IPB should better run at 133 MHz. */
> -#if defined(CONFIG_MGT5100)
> +# if defined(CONFIG_MGT5100)
> setbits_be32(&mm->addecr, 1);
> -#elif defined(CONFIG_MPC5200)
> +# elif defined(CONFIG_MPC5200)
> setbits_be32(&mm->ipbi_ws_ctrl, 1);
> -#endif
> +# endif
> /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
> addecr = in_be32(&cdm->cfg);
> addecr &= ~0x103;
--
Question : If you were redesigning UNIX, what would you do differently?
Ken Thompson: I'd spell creat with an e.
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
More information about the U-Boot
mailing list