[U-Boot] U-Boot 2009.11 ( 2��月 05 2010 - 23:46:51) how two question marks generated.

Wolfgang Denk wd at denx.de
Sat Feb 6 15:20:26 CET 2010


Dear linzhavon,

In message <9c4bdd041002060104k2ff29a02mfffa83c15b70a910 at mail.gmail.com> you wrote:
> I try to port U-Boot 2009.11 to s3c2440, something success. as follows:
> 
> U-Boot 2009.11 ( 2=EF=BF=BD=EF=BF=BD=E6=9C=88 05 2010 - 23:46:51)
> 
> DRAM:  64 MB
> Flash:  2 MB
> NAND:  NAND_ECC_NONE selected by board driver. This is not recommended !!
> 64 MiB
> In:    serial
> Out:   serial
> Err:   serial
> Net:   dm9000
> 
> ---------------------------------------------------------------------------=
> -------------------------------------
> 
> but how two question marks generated?
> and replies appreciated.

Where do you see two question marks?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
In the future, you're going to get computers as prizes  in  breakfast
cereals.  You'll  throw  them out because your house will be littered
with them.                                             - Robert Lucky


More information about the U-Boot mailing list