[U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching

Ben Warren biggerbadderben at gmail.com
Sun Feb 7 07:32:05 CET 2010


Dirk,

On 2/5/2010 11:30 PM, Dirk Behme wrote:
> On 24.01.2010 01:05, Tom wrote:
>    
>> Khasim Syed Mohammed wrote:
>>      
>>>    From 9bb1c3501c8f098dac6e224c99e409ebf92b0ab9 Mon Sep 17 00:00:00 2001
>>> From: Syed Mohammed Khasim<khasim at ti.com>
>>> Date: Mon, 18 Jan 2010 18:11:14 +0530
>>> Subject: [PATCH] Enable I2C bus switching
>>>
>>> OMAP3 supports Multiple I2C channels, this patch allows
>>> us to use i2c dev<bus no>   command to switch between busses.
>>>
>>> Signed-off-by: Syed Mohammed Khasim<khasim at ti.com>
>>> Acked-by: Heiko Schocher<hs at denx.de>
>>> ---
>>>    drivers/i2c/omap24xx_i2c.c     |    5 +++++
>>>    include/configs/omap3_beagle.h |    6 ++++++
>>>    2 files changed, 11 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
>>> index ff18991..e8c8184 100644
>>> --- a/drivers/i2c/omap24xx_i2c.c
>>> +++ b/drivers/i2c/omap24xx_i2c.c
>>> @@ -435,3 +435,8 @@ int i2c_set_bus_num(unsigned int bus)
>>>
>>>    	return 0;
>>>    }
>>> +
>>> +int i2c_get_bus_num(void)
>>> +{
>>> +	return (int) current_bus;
>>> +}
>>> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
>>> index a8abb0e..4d516a4 100644
>>> --- a/include/configs/omap3_beagle.h
>>> +++ b/include/configs/omap3_beagle.h
>>> @@ -100,6 +100,12 @@
>>>    /* DDR - I use Micron DDR */
>>>    #define CONFIG_OMAP3_MICRON_DDR		1
>>>
>>> +/* Enable Multi Bus support for I2C */
>>> +#define CONFIG_I2C_MULTI_BUS		1
>>> +
>>> +/* Probe all devices */
>>> +#define CONFIG_SYS_I2C_NOPROBES		{0x0, 0x0}
>>>        
>> Most/All of the configs I reviewed set the addr element
>> to a valid address.  I do not believe 0 is a valid address
>> on omap.  If the intent is a double negative
>> {0, 0} == probe all
>> Then add a comment.
>>      
> I would fix this, but I have no idea what to add :( Any hint?
>
>    
CONFIG_SYS_I2C_NOPROBES doesn't have to be defined.  It's there as a 
convenience in case there are devices that you don't want to be included 
when probing the bus.  If there's nothing you want to skip, don't define it.
> Dirk
> _____
>    
regards,
Ben


More information about the U-Boot mailing list