[U-Boot] [PATCH] NET: kirkwood-egiga smi access fix

[Ben Warren]

Siddarth,

On 1/18/2010 9:39 PM, Siddarth Gore wrote:
> Although the datasheet mentions seperate smi registers for each
> port, using Port 1 smi register to access ethernet phys does not
> work. Hence only Port 0 smi register should be used to access all
> devices connected to the smi bus. This behavior is consistant with
> the mv643xx driver in the linux kernel.
>
> Signed-off-by: Siddarth Gore<gores at marvell.com>
> Acked-by: Prafulla Wadaskar<prafulla at marvell.com>
> ---
>   drivers/net/kirkwood_egiga.c |   13 +++++++------
>   1 files changed, 7 insertions(+), 6 deletions(-)
>    
Applied to net repo.

thanks,
Ben