[U-Boot] [PATCH] add explicit bbt creation to commandline
Steven Zedeck
saz at proliphix.com
Sat Feb 13 03:14:51 CET 2010
Scott Wood-2 wrote:
>
> Steven Zedeck wrote:
>>
>>
>> Steven Zedeck wrote:
>>>
>>>> No, I mean in the NAND driver for your specific hardware
>>>> (fsl_elbc_nand.c, mxc_nand.c, ndfc_nand.c, etc).
>>> You have been so helpful. I looked at the mtd/nand/Makefile and the only
>>> file that's included besides the nand* files is:
>>>
>>> COBJS-y += fsl_upm.o
>
> You've got an old/out-of-tree u-boot.
>
>> I think we are just using the base/generic mtd nand driver. Is that
>> possible?
>
> No, there must be a controller driver. It may be in a board or cpu
> directory, though. Search for board_nand_init().
>
>
Its in board/atmel/at91sam9rlek/nand.c
It doesn't do much but set up the various GPIO connections. Here's the
function:
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CFG_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol;
nand->dev_ready = at91sam9rlek_nand_ready;
nand->chip_delay = 20;
return 0;
}
thanks,
Steve
--
View this message in context: http://old.nabble.com/-PATCH--add-explicit-bbt-creation-to-commandline-tp18299804p27571823.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
More information about the U-Boot
mailing list