[U-Boot] [PATCH 3/4 v4] arm: add support for the suen3_p1a board from keymile

[Prafulla Wadaskar]

> -----Original Message-----
> From: Heiko Schocher [mailto:hs at denx.de] 
> Sent: Friday, February 12, 2010 1:36 PM
> To: U-Boot user list
> Cc: Wolfgang Denk; Prafulla Wadaskar; Scott Wood; Stefan Roese
> Subject: [PATCH 3/4 v4] arm: add support for the suen3_p1a 
> board from keymile
> 
> This patch adds support for the Keymile suen3_p1a board which
> is based on the Marvell Kirkwood (88F6281) SoC. As this
> is a variant of the mgcoge2_arm_p1a board, this board
> also uses common code stored in board/keymile/km_arm/km_arm.c

I hope each board that you are supporting have registered MACHIN_ID, if not pls do it and code it in C file.
I could not find relevant definition usage in c file for the same
Secondly CONFIG_MACH_<boardname> should be defined in header

Regards..
Prafulla . .