[U-Boot] Problem with programming UPM

Lasse Skov lasko at kk-electronic.com
Fri Feb 19 08:29:23 CET 2010


Hey

I had tried to program the UPM on my MPC8377 cpu.

When I run the upmconfig function in the /cpu/mpc83xx/cpu.c

And when I try to do the dummy write then the target is resetting.

*dummy = 0;  /* Write the value to memory and increment MAD */

Why this happens, anyone had an idea?

/Lasse


More information about the U-Boot mailing list