[U-Boot] AT91RM9200 boots from NOR Flash or not

[Wolfgang Denk]

Dear "Nikumbh, Raj (IE10)",

In message <047570340A9B314187387ACC723459ACAE018E at IE10EV811.global.ds.honeywell.com> you wrote:
> 
> I want to use the u-boot-1.3.4 with the patch from AT91 for my custom
> board based on AT91RM9200 with 32MB SDRAM (MT48LC8M16A2) and 8MB flash
> (AT49BV6416-70TI). I am directly flashing the image to flash location at
> 0x10000000 (beginning of the flash). But I am not able to see anything
> on my debug port.

> I  want to know if I am doing something wrong.

We don't know your hardware or the changes you might have made to the
code to adapt it for your hardware.

Also, U-Boot 1.3.4 is very old.

Please update to a current version (top of tree recommended) and try
again.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I am an atheist, thank God!