[U-Boot] AT91RM9200 boots from NOR Flash or not

[Drasko DRASKOVIC]

On Fri, Feb 19, 2010 at 1:16 PM, Nikumbh, Raj (IE10) <
Raj.Nikumbh at honeywell.com> wrote:

>  I am using JTAG port with SAM-ICE.
>
Can't you stop your uC at reset addr and step to see if you go to _start or
hit some exception?
I guess you connect GDB to JTAG via monitor and disassemble what you have
burned at 0x0 , then compare to startup.S of U-Boot?
Also, check if your flashing went well by fumping flash image.