[U-Boot] [PATCH v2] Add bootcount to AT91
Anders Darander
anders.darander at gmail.com
Thu Feb 25 15:57:03 CET 2010
Use AT91_GPBR 3 as a bootcount register.
The bootmagic and the bootcount shares AT91_GPBR 3.
Signed-off-by: Anders Darander <ad at datarespons.se>
---
Changes since V1:
* Corrected multiline comment.
* Added a comment about why a common register is used for the
bootmagic and the bootcount.
* Mask the input to bootcount_store to 16 bits.
cpu/arm926ejs/at91/cpu.c | 34 ++++++++++++++++++++++++++++++++++
1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/cpu/arm926ejs/at91/cpu.c b/cpu/arm926ejs/at91/cpu.c
index 993b299..99a4c49 100644
--- a/cpu/arm926ejs/at91/cpu.c
+++ b/cpu/arm926ejs/at91/cpu.c
@@ -35,6 +35,13 @@
#define AT91_MAIN_CLOCK 0
#endif
+/*
+ * The at91sam9260 has 4 GPBR (0-3), we'll use the last one, nr 3,
+ * to keep track of the bootcount.
+ */
+#define AT91_GPBR_BOOTCOUNT_REGISTER 3
+#define AT91_BOOTCOUNT_ADDRESS (AT91_GPBR + 4*AT91_GPBR_BOOTCOUNT_REGISTER)
+
int arch_cpu_init(void)
{
return at91_clock_init(AT91_MAIN_CLOCK);
@@ -56,3 +63,30 @@ int print_cpuinfo(void)
return 0;
}
#endif
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+/*
+ * Just as the mpc5xxx, we combine the BOOTCOUNT_MAGIC and boocount
+ * in one 32-bit register. This is done, as the AT91SAM9260 only has
+ * 4 GPBR.
+ */
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(AT91_BASE_SYS + AT91_BOOTCOUNT_ADDRESS);
+
+ *save_addr = (BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff);
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(AT91_BASE_SYS + AT91_BOOTCOUNT_ADDRESS);
+
+ if ((*save_addr & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
+ return 0;
+ else
+ return (*save_addr & 0x0000ffff);
+}
+
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
--
1.7.0
More information about the U-Boot
mailing list