[U-Boot] [PATCH 0/4] Support for board Calao USB A9263

[Thomas Petazzoni]

Hello,

This patchset implements the support for the Calao USB A9263 board
(patch 4). The first three patches are preliminary work, to convert
the Atmel Dataflash SPI driver to the new C struct accessors
introduced a few months ago for AT91 support in U-Boot.

Thanks,

Thomas

Thomas Petazzoni (4):
  Atmel Dataflash: convert to C struct accessors
  at91_spi: remove register offsets
  at91sam9263: add new style definition for SPI0_BASE
  Support for Calao USB A9263 board based on AT91SAM9263 CPU

 MAINTAINERS                                  |    4 +
 MAKEALL                                      |    1 +
 Makefile                                     |    3 +
 arch/arm/include/asm/arch-at91/at91_spi.h    |  152 +++++++++------------
 arch/arm/include/asm/arch-at91/at91sam9263.h |    1 +
 board/calao/usb-a9263/Makefile               |   58 ++++++++
 board/calao/usb-a9263/config.mk              |   24 ++++
 board/calao/usb-a9263/partition.c            |   38 ++++++
 board/calao/usb-a9263/usb-a9263.c            |  186 ++++++++++++++++++++++++++
 drivers/spi/atmel_dataflash_spi.c            |   73 ++++++-----
 include/configs/usb-a9263.h                  |  182 +++++++++++++++++++++++++
 11 files changed, 598 insertions(+), 124 deletions(-)
 create mode 100644 board/calao/usb-a9263/Makefile
 create mode 100644 board/calao/usb-a9263/config.mk
 create mode 100644 board/calao/usb-a9263/partition.c
 create mode 100644 board/calao/usb-a9263/usb-a9263.c
 create mode 100644 include/configs/usb-a9263.h