[U-Boot] [PATCH v4] TI: DaVinci: Add board specific code for da850 EVM

[Paulraj, Sandeep]

> 
> Provides initial support for TI OMAP-L138/DA850 SoC devices on
> a Logic PD EVM board.
> 
> Provides:
> Initial boot and configuration.
> Support for i2c.
> UART support (console).
> 
> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj at ti.com>
> Acked-by: Ben Gardiner <bengardiner at nanometrics.ca>
> Reviewed-by: Wolfgang Denk <wd at denx.de>
> ---
>  MAINTAINERS                                  |    4 +
>  MAKEALL                                      |    1 +
>  Makefile                                     |    3 +-
>  arch/arm/include/asm/arch-davinci/hardware.h |    1 +
>  board/davinci/da8xxevm/Makefile              |    1 +
>  board/davinci/da8xxevm/da850evm.c            |  111 ++++++++++++++++++++
>  include/configs/da850evm.h                   |  140
> ++++++++++++++++++++++++++
>  7 files changed, 260 insertions(+), 1 deletions(-)
>  create mode 100644 board/davinci/da8xxevm/da850evm.c
>  create mode 100644 include/configs/da850evm.h


Sudhakar,

Unfortunately there are some checkpatch errors which need your attention.

Atleast one error cannot be fixed but the others should.

Also when I tried to apply the first patch in this series, it just would not apply. I applied the patch that this is dependent on.

Can you submit all 3 patches one final time? It appears as if there are some dependencies.

Thanks,
Sandeep