[U-Boot] [PATCH 1/4] Atmel Dataflash: convert to C struct accessors

[Thomas Petazzoni]

On Tue, 8 Jun 2010 15:20:57 -0400
Mike Frysinger <vapier at gentoo.org> wrote:

> speaking historically, the dataflash code absolutely has its place.
> it existed long before the SPI flash framework.  but i'm looking
> forward only now.

Yes, of course, understood.

However, the Dataflash aren't normal SPI flash, they don't have the
same opcodes. For example, drivers/mtd/spi/spi_flash.c assumes that it
can probe the "ID code" of the SPI flash by sending the CMD_READ_ID
(0x9F) command (in spi_flash_probe()). This works for SPI flashes, but
not for Dataflashes. The identification of Dataflashes takes place with
command GET_STATUS (0xD7) in drivers/mtd/at45.c, which has a different
return value than the 0x9F command of SPI flashes. Am I missing
something ?

In terms of code infrastructure/organization, how do you suggest to
handle this ?

> i think the first step would be to convert the boards we can and
> leave a #warning for the rest that the dataflash code is being killed
> off.  then after some time, if no one has fixed the remainders, we do
> our best to convert them. -mike

Ok.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100609/7503683b/attachment.pgp