[U-Boot] [PATCH] ppc4xx: Add T3COPR board support (PPC460GT based)

Stefan Roese sr at denx.de
Thu Jun 10 11:28:23 CEST 2010


This patch adds support for the T3CORP board, based on the
AppliedMicro (AMCC) PPC460GT.

Signed-off-by: Stefan Roese <sr at denx.de>
---
 MAINTAINERS                |    1 +
 MAKEALL                    |    1 +
 Makefile                   |    3 +
 board/t3corp/Makefile      |   53 +++++
 board/t3corp/chip_config.c |   59 +++++
 board/t3corp/config.mk     |   39 ++++
 board/t3corp/init.S        |   99 ++++++++
 board/t3corp/t3corp.c      |  198 ++++++++++++++++
 include/configs/t3corp.h   |  544 ++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 997 insertions(+), 0 deletions(-)
 create mode 100644 board/t3corp/Makefile
 create mode 100644 board/t3corp/chip_config.c
 create mode 100644 board/t3corp/config.mk
 create mode 100644 board/t3corp/init.S
 create mode 100644 board/t3corp/t3corp.c
 create mode 100644 include/configs/t3corp.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 7a13d28..5b88243 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -383,6 +383,7 @@ Stefan Roese <sr at denx.de>
 	rainier		PPC440GRx
 	sequoia		PPC440EPx
 	sycamore	PPC405GPr
+	t3corp		PPC460GT
 	taishan		PPC440GX
 	walnut		PPC405GP
 	yellowstone	PPC440GR
diff --git a/MAKEALL b/MAKEALL
index 2527352..17978dd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -262,6 +262,7 @@ LIST_4xx="		\
 	sc3		\
 	sequoia		\
 	sequoia_nand	\
+	t3corp		\
 	taihu		\
 	taishan		\
 	v5fx30teval	\
diff --git a/Makefile b/Makefile
index c26e491..0efbff0 100644
--- a/Makefile
+++ b/Makefile
@@ -1545,6 +1545,9 @@ rainier_ramboot_config: unconfig
 	@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
 		$(obj)board/amcc/sequoia/config.tmp
 
+t3corp_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx t3corp
+
 taihu_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
 
diff --git a/board/t3corp/Makefile b/board/t3corp/Makefile
new file mode 100644
index 0000000..e2bb546
--- /dev/null
+++ b/board/t3corp/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2010
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	:= $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+SOBJS	:= init.o
+
+COBJS   := $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c
new file mode 100644
index 0000000..c00bf16
--- /dev/null
+++ b/board/t3corp/chip_config.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+	{
+		"600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1000", "CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1066", "CPU:1066 PLB: 266 OPB:  88 EBC:  88",
+		{
+			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/t3corp/config.mk b/board/t3corp/config.mk
new file mode 100644
index 0000000..616aa19
--- /dev/null
+++ b/board/t3corp/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2010
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/t3corp/init.S b/board/t3corp/init.S
new file mode 100644
index 0000000..4a4217f
--- /dev/null
+++ b/board/t3corp/init.S
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm/mmu.h>
+
+/*
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ */
+	.section .bootpg,"ax"
+	.globl tlbtab
+
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
+	 * use the speed up boot process. It is patched after relocation to
+	 * enable SA_I
+	 */
+	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M,
+		 CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G)
+
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the DDR(2) detection
+	 * routine.
+	 */
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0,
+		 AC_RWX | SA_G)
+#endif
+
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xc,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xc,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xd,
+		 AC_RW | SA_IG)
+
+	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xd,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xd,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xd,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xd,
+		 AC_RW | SA_IG)
+
+	/* PCIe UTL register */
+	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG)
+
+	/* TLB-entry for FPGA(s) */
+	tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4,
+		 AC_RW | SA_IG)
+
+	/* TLB-entry for OCM */
+	tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4,
+		 AC_RWX | SA_I)
+
+	/* TLB-entry for Local Configuration registers => peripherals */
+	tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M,
+		 CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_RWX | SA_IG)
+
+	tlbtab_end
diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c
new file mode 100644
index 0000000..c64f100
--- /dev/null
+++ b/board/t3corp/t3corp.c
@@ -0,0 +1,198 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr at denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc440.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/4xx_pcie.h>
+#include <asm/gpio.h>
+
+int board_early_init_f(void)
+{
+	/*
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 */
+	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC0ER, 0x00000000);	/* disable all */
+	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
+	mtdcr(UIC0PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
+
+	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC1ER, 0x00000000);	/* disable all */
+	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
+	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
+
+	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC2ER, 0x00000000);	/* disable all */
+	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
+	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
+
+	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
+	mtdcr(UIC3ER, 0x00000000);	/* disable all */
+	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
+	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC3TR, 0x00000000);	/* per ref-board manual */
+	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * enable GPIO 49-63
+	 * UART0: 4 pins
+	 */
+	mtsdr(SDR0_PFC0, 0x00007fff);
+	mtsdr(SDR0_PFC1, 0x00040000);
+
+	/* Enable PCI host functionality in SDR0_PCI0 */
+	mtsdr(SDR0_PCI0, 0xe0000000);
+
+	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
+
+	/* Setup PLB4-AHB bridge based on the system address map */
+	mtdcr(AHB_TOP, 0x8000004B);
+	mtdcr(AHB_BOT, 0x8000004B);
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: T3CORP");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	/*
+	 * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
+	 * (Spansion 29GL512), but the boot EBC mapping only supports a maximum
+	 * of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
+	 * To solve this problem, the FLASH has to get remapped to another
+	 * EBC address which accepts bigger regions:
+	 *
+	 * 0xfn00.0000 -> 4.cn00.0000
+	 */
+
+	u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
+		EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;
+
+	/* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
+	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
+		| bxcr_bw
+		| EBC_BXCR_BU_RW
+		| EBC_BXCR_BW_16BIT);
+
+	/* Remove TLB entry of boot EBC mapping */
+	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
+
+	/* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
+	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
+
+	/*
+	 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
+	 * 0xfc00.0000 is possible
+	 */
+
+	/*
+	 * Clear potential errors resulting from auto-calibration.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	set_mcsr(get_mcsr());
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	u32 sdr0_srst1 = 0;
+	u32 eth_cfg;
+
+	/*
+	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
+	 * This is board specific, so let's do it here.
+	 */
+	mfsdr(SDR0_ETH_CFG, eth_cfg);
+	/* disable SGMII mode */
+	eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
+		     SDR0_ETH_CFG_SGMII1_ENABLE |
+		     SDR0_ETH_CFG_SGMII0_ENABLE);
+	/* Set the for 2 RGMII mode */
+	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
+	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
+	eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+	mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+	/*
+	 * The AHB Bridge core is held in reset after power-on or reset
+	 * so enable it now
+	 */
+	mfsdr(SDR0_SRST1, sdr0_srst1);
+	sdr0_srst1 &= ~SDR0_SRST1_AHB;
+	mtsdr(SDR0_SRST1, sdr0_srst1);
+
+	return 0;
+}
+
+int board_pcie_last(void)
+{
+	/*
+	 * Only PCIe0 for now, PCIe1 hangs on this boards
+	 */
+	return 0;
+}
+
+/*
+ * Board specific WRDTR and CLKTR values used by the auto-
+ * calibration code (4xx_ibm_ddr2_autocalib.c).
+ */
+static struct sdram_timing board_scan_options[] = {
+	{1, 2},
+	{-1, -1}
+};
+
+struct sdram_timing *ddr_scan_option(struct sdram_timing *default_val)
+{
+	return board_scan_options;
+}
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
new file mode 100644
index 0000000..f261455
--- /dev/null
+++ b/include/configs/t3corp.h
@@ -0,0 +1,544 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr at denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * t3corp.h - configuration for T3CORP (460GT)
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_460GT		1	/* Specific PPC460GT	*/
+#define CONFIG_440		1
+#define CONFIG_4xx		1	/* ... PPC4xx family */
+
+#define CONFIG_HOSTNAME		t3corp
+
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#include "amcc-common.h"
+
+#define CONFIG_SYS_CLK_FREQ	66666667	/* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R	1	/* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R		1	/* Call misc_init_r */
+#define CONFIG_BOARD_TYPES		1	/* support board types */
+#define CONFIG_FIT
+#define CFG_ALT_MEMTEST
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory */
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs */
+#define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE
+
+#define CONFIG_SYS_PCIE_MEMBASE		0xb0000000	/* mapped PCIe mem */
+#define CONFIG_SYS_PCIE_MEMSIZE		0x08000000	/* incr for PCIe */
+#define CONFIG_SYS_PCIE_BASE		0xc4000000	/* PCIe UTL regs */
+
+#define CONFIG_SYS_PCIE0_CFGBASE	0xc0000000
+#define CONFIG_SYS_PCIE1_CFGBASE	0xc1000000
+#define CONFIG_SYS_PCIE0_XCFGBASE	0xc3000000
+#define CONFIG_SYS_PCIE1_XCFGBASE	0xc3001000
+
+#define	CONFIG_SYS_PCIE0_UTLBASE	0xc08010000ULL	/* 36bit phys addr */
+
+/* base address of inbound PCIe window */
+#define CONFIG_SYS_PCIE_INBOUND_BASE	0x000000000ULL	/* 36bit phys addr */
+
+/* EBC stuff */
+#define CONFIG_SYS_FLASH_BASE		0xFC000000	/* later mapped here */
+#define CONFIG_SYS_FLASH_SIZE		(64 << 20)
+
+#define CONFIG_SYS_FPGA1_BASE		0xe0000000
+#define CONFIG_SYS_FPGA2_BASE		0xe0100000
+#define CONFIG_SYS_FPGA3_BASE		0xe0200000
+
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000	/* EBC Boot Space */
+#define CONFIG_SYS_FLASH_BASE_PHYS_H	0x4
+#define CONFIG_SYS_FLASH_BASE_PHYS_L	0xCC000000
+#define CONFIG_SYS_FLASH_BASE_PHYS \
+	(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
+	| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
+
+#define CONFIG_SYS_OCM_BASE		0xE3000000	/* OCM: 64k */
+#define CONFIG_SYS_SRAM_BASE		0xE8000000	/* SRAM: 256k */
+#define CONFIG_SYS_LOCAL_CONF_REGS	0xEF000000
+
+#define CONFIG_SYS_PERIPHERAL_BASE	0xEF600000	/* internal periph. */
+
+#define CONFIG_SYS_AHB_BASE		0xE2000000	/* int. AHB periph. */
+
+/*
+ * Initial RAM & stack pointer (placed in OCM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Serial Port
+ */
+#undef CONFIG_UART1_CONSOLE	/* define this if you want console on UART1 */
+
+/*
+ * Environment
+ */
+/*
+ * Define here the location of the environment variables (FLASH).
+ */
+#define	CONFIG_ENV_IS_IN_FLASH		/* use FLASH for environment vars */
+
+/*
+ * FLASH related
+ */
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
+#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD reset cmd */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sectors p. chip*/
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase/ms*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write/ms*/
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* buff'd writes (20x faster)*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* 'E' for empty sector on flinfo */
+
+#define CONFIG_ENV_SECT_SIZE		0x20000	/* sector size */
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_MONITOR_BASE - \
+					 CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE			0x4000	/* env sector size */
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+
+/*
+ * DDR2 SDRAM
+ */
+#define CONFIG_AUTOCALIB	"silent\0"	/* default is non-verbose    */
+#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION	/* IBM DDR autocalibration   */
+#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION	/* dynamic DDR autocal debug */
+#undef CONFIG_PPC4xx_DDR_METHOD_A
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+/* Memory Queue */
+#define CONFIG_SYS_SDRAM_R0BAS		(SDRAM_RXBAS_SDBA_ENCODE(0) | \
+					 SDRAM_RXBAS_SDSZ_256)
+#define CONFIG_SYS_SDRAM_R1BAS		0x00000000
+#define CONFIG_SYS_SDRAM_R2BAS		0x00000000
+#define CONFIG_SYS_SDRAM_R3BAS		0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDULL	0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDUHB	0x00000008
+#define CONFIG_SYS_SDRAM_CONF1LL	0x80001C00
+#define CONFIG_SYS_SDRAM_CONF1HB	0x80001C80
+#define CONFIG_SYS_SDRAM_CONFPATHB	0x10a68000
+
+#define CONFIG_DDR_ECC
+#define CONFIG_SYS_MBYTES_SDRAM		256
+
+#define CAS_LATENCY			JEDEC_MA_MR_CL_DDR2_5_0_CLK
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+#define CONFIG_SYS_SDRAM0_MB0CF		(SDRAM_RXBAS_SDAM_MODE7		| \
+					 SDRAM_RXBAS_SDBE_ENABLE)
+#define CONFIG_SYS_SDRAM0_MB1CF		SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB2CF		SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB3CF		SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MCOPT1	(SDRAM_MCOPT1_MCHK_GEN		| \
+					 SDRAM_MCOPT1_PMU_OPEN		| \
+					 SDRAM_MCOPT1_DMWD_32		| \
+					 SDRAM_MCOPT1_8_BANKS		| \
+					 SDRAM_MCOPT1_DDR2_TYPE		| \
+					 SDRAM_MCOPT1_QDEP		| \
+					 SDRAM_MCOPT1_RWOO_DISABLED	| \
+					 SDRAM_MCOPT1_WOOO_DISABLED	| \
+					 SDRAM_MCOPT1_DREF_NORMAL)
+#define CONFIG_SYS_SDRAM0_MCOPT2	0x00000000
+#define CONFIG_SYS_SDRAM0_MODT0		SDRAM_MODT_EB0W_ENABLE
+#define CONFIG_SYS_SDRAM0_MODT1		0x00000000
+#define CONFIG_SYS_SDRAM0_MODT2		0x00000000
+#define CONFIG_SYS_SDRAM0_MODT3		0x00000000
+#define CONFIG_SYS_SDRAM0_CODT		(SDRAM_CODT_RK0R_ON		| \
+					 SDRAM_CODT_DQS_1_8_V_DDR2	| \
+					 SDRAM_CODT_IO_NMODE)
+#define CONFIG_SYS_SDRAM0_RTR		SDRAM_RTR_RINT_ENCODE(1560)
+#define CONFIG_SYS_SDRAM0_INITPLR0					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(80)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
+#define CONFIG_SYS_SDRAM0_INITPLR1					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(3)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)				| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
+#define CONFIG_SYS_SDRAM0_INITPLR2					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(2)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2)			| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
+#define CONFIG_SYS_SDRAM0_INITPLR3					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(2)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3)			| \
+	 SDRAM_INITPLR_IMA_ENCODE(0))
+#define CONFIG_SYS_SDRAM0_INITPLR4					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(2)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)				| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_ENABLE		| \
+				  JEDEC_MA_EMR_RTT_150OHM))
+#define CONFIG_SYS_SDRAM0_INITPLR5					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(200)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)				| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC		| \
+				  CAS_LATENCY				| \
+				  JEDEC_MA_MR_BLEN_4			| \
+				  JEDEC_MA_MR_DLL_RESET))
+#define CONFIG_SYS_SDRAM0_INITPLR6					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(3)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(0x0)					| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
+#define CONFIG_SYS_SDRAM0_INITPLR7					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(26)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR8					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(26)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR9					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(26)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR10					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(26)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR11					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(2)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)				| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC		| \
+				  CAS_LATENCY				| \
+				  JEDEC_MA_MR_BLEN_4))
+#define CONFIG_SYS_SDRAM0_INITPLR12					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(2)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)				| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER		| \
+				  JEDEC_MA_EMR_RDQS_DISABLE		| \
+				  JEDEC_MA_EMR_DQS_ENABLE		| \
+				  JEDEC_MA_EMR_RTT_150OHM		| \
+				  JEDEC_MA_EMR_ODS_NORMAL))
+#define CONFIG_SYS_SDRAM0_INITPLR13					\
+	(SDRAM_INITPLR_ENABLE						| \
+	 SDRAM_INITPLR_IMWT_ENCODE(2)					| \
+	 SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)			| \
+	 SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)				| \
+	 SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT			| \
+				  JEDEC_MA_EMR_RDQS_DISABLE		| \
+				  JEDEC_MA_EMR_DQS_ENABLE		| \
+				  JEDEC_MA_EMR_RTT_150OHM		| \
+				  JEDEC_MA_EMR_ODS_NORMAL))
+#define CONFIG_SYS_SDRAM0_INITPLR14	SDRAM_INITPLR_DISABLE
+#define CONFIG_SYS_SDRAM0_INITPLR15	SDRAM_INITPLR_DISABLE
+#define CONFIG_SYS_SDRAM0_RQDC		(SDRAM_RQDC_RQDE_ENABLE		| \
+					 SDRAM_RQDC_RQFD_ENCODE(56))
+#define CONFIG_SYS_SDRAM0_RFDC		SDRAM_RFDC_RFFD_ENCODE(599)
+#define CONFIG_SYS_SDRAM0_RDCC		(SDRAM_RDCC_RDSS_T2)
+#define CONFIG_SYS_SDRAM0_DLCR		(SDRAM_DLCR_DCLM_AUTO		| \
+					 SDRAM_DLCR_DLCS_CONT_DONE	| \
+					 SDRAM_DLCR_DLCV_ENCODE(155))
+#define CONFIG_SYS_SDRAM0_CLKTR		SDRAM_CLKTR_CLKP_90_DEG_ADV
+#define CONFIG_SYS_SDRAM0_WRDTR		SDRAM_WRDTR_WTR_90_DEG_ADV
+#define CONFIG_SYS_SDRAM0_SDTR1		(SDRAM_SDTR1_LDOF_2_CLK		| \
+					 SDRAM_SDTR1_RTW_2_CLK		| \
+					 SDRAM_SDTR1_RTRO_1_CLK)
+#define CONFIG_SYS_SDRAM0_SDTR2		(SDRAM_SDTR2_RCD_3_CLK		| \
+					 SDRAM_SDTR2_WTR_2_CLK		| \
+					 SDRAM_SDTR2_XSNR_32_CLK	| \
+					 SDRAM_SDTR2_WPC_4_CLK		| \
+					 SDRAM_SDTR2_RPC_2_CLK		| \
+					 SDRAM_SDTR2_RP_3_CLK		| \
+					 SDRAM_SDTR2_RRD_2_CLK)
+#define CONFIG_SYS_SDRAM0_SDTR3		(SDRAM_SDTR3_RAS_ENCODE(8)	| \
+					 SDRAM_SDTR3_RC_ENCODE(11)	| \
+					 SDRAM_SDTR3_XCS		| \
+					 SDRAM_SDTR3_RFC_ENCODE(26))
+#define CONFIG_SYS_SDRAM0_MMODE		(SDRAM_MMODE_WR_DDR2_3_CYC	| \
+					 CAS_LATENCY			| \
+					 SDRAM_MMODE_BLEN_4)
+#define CONFIG_SYS_SDRAM0_MEMODE	(SDRAM_MEMODE_DQS_ENABLE	| \
+					 SDRAM_MEMODE_RTT_150OHM)
+
+/*
+ * I2C
+ */
+#define CONFIG_SYS_I2C_SPEED			400000	/* I2C speed */
+
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x52
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		16
+
+/*
+ * Ethernet
+ */
+#define CONFIG_IBM_EMAC4_V4	1
+
+#define CONFIG_HAS_ETH0
+
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_M88E1111_PHY
+/* Disable fibre since fibre/copper auto-selection doesn't seem to work */
+#define CONFIG_M88E1111_DISABLE_FIBRE
+
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CONFIG_PHY_DYNAMIC_ANEG	1
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_AMCC_DEF_ENV						\
+	CONFIG_AMCC_DEF_ENV_POWERPC					\
+	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
+	"kernel_addr=fc000000\0"					\
+	"fdt_addr=fc1e0000\0"						\
+	"ramdisk_addr=fc200000\0"					\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP\0"						\
+	""
+
+/*
+ * Commands additional to the ones defined in amcc-common.h
+ */
+#define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SDRAM
+
+/*
+ * PCI stuff
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI, no PCI support, only PCIe */
+#undef CONFIG_SYS_PCI_TARGET_INIT
+#undef CONFIG_SYS_PCI_MASTER_INIT
+
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+
+/*
+ * T3CORP has 64MBytes of NOR FLASH (Spansion 29GL512), but the
+ * boot EBC mapping only supports a maximum of 16MBytes
+ * (4.ff00.0000 - 4.ffff.ffff).
+ * To solve this problem, the FLASH has to get remapped to another
+ * EBC address which accepts bigger regions:
+ *
+ * 0xfc00.0000 -> 4.cc00.0000
+ */
+
+/* Memory Bank 0 (NOR-FLASH) */
+#define CONFIG_SYS_EBC_PB0AP	(EBC_BXAP_BME_DISABLED		|	\
+				 EBC_BXAP_TWT_ENCODE(16)	|	\
+				 EBC_BXAP_BCE_DISABLE		|	\
+				 EBC_BXAP_BCT_2TRANS		|	\
+				 EBC_BXAP_CSN_ENCODE(1)		|	\
+				 EBC_BXAP_OEN_ENCODE(1)		|	\
+				 EBC_BXAP_WBN_ENCODE(1)		|	\
+				 EBC_BXAP_WBF_ENCODE(1)		|	\
+				 EBC_BXAP_TH_ENCODE(7)		|	\
+				 EBC_BXAP_RE_DISABLED		|	\
+				 EBC_BXAP_SOR_DELAYED		|	\
+				 EBC_BXAP_BEM_WRITEONLY		|	\
+				 EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB0CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_BOOT_BASE_ADDR) | \
+				 EBC_BXCR_BS_16MB		|	\
+				 EBC_BXCR_BU_RW			|	\
+				 EBC_BXCR_BW_16BIT)
+
+/* Memory Bank 1 (FPGA 1) */
+#define CONFIG_SYS_EBC_PB1AP	(EBC_BXAP_BME_DISABLED		|	\
+				 EBC_BXAP_TWT_ENCODE(5)		|	\
+				 EBC_BXAP_CSN_ENCODE(0)		|	\
+				 EBC_BXAP_OEN_ENCODE(4)		|	\
+				 EBC_BXAP_WBN_ENCODE(0)		|	\
+				 EBC_BXAP_WBF_ENCODE(0)		|	\
+				 EBC_BXAP_TH_ENCODE(1)		|	\
+				 EBC_BXAP_RE_DISABLED		|	\
+				 EBC_BXAP_SOR_DELAYED		|	\
+				 EBC_BXAP_BEM_RW		|	\
+				 EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB1CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
+				 EBC_BXCR_BS_1MB		|	\
+				 EBC_BXCR_BU_RW			|	\
+				 EBC_BXCR_BW_32BIT)
+
+/* Memory Bank 2 (FPGA 2) */
+#define CONFIG_SYS_EBC_PB2AP	(EBC_BXAP_BME_DISABLED		|	\
+				 EBC_BXAP_TWT_ENCODE(5)		|	\
+				 EBC_BXAP_CSN_ENCODE(0)		|	\
+				 EBC_BXAP_OEN_ENCODE(4)		|	\
+				 EBC_BXAP_WBN_ENCODE(0)		|	\
+				 EBC_BXAP_WBF_ENCODE(0)		|	\
+				 EBC_BXAP_TH_ENCODE(1)		|	\
+				 EBC_BXAP_RE_DISABLED		|	\
+				 EBC_BXAP_SOR_DELAYED		|	\
+				 EBC_BXAP_BEM_RW		|	\
+				 EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB2CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \
+				 EBC_BXCR_BS_1MB		|	\
+				 EBC_BXCR_BU_RW			|	\
+				 EBC_BXCR_BW_32BIT)
+
+/* Memory Bank 3 (FPGA 3) */
+#define CONFIG_SYS_EBC_PB3AP	(EBC_BXAP_BME_DISABLED		|	\
+				 EBC_BXAP_TWT_ENCODE(5)		|	\
+				 EBC_BXAP_CSN_ENCODE(0)		|	\
+				 EBC_BXAP_OEN_ENCODE(4)		|	\
+				 EBC_BXAP_WBN_ENCODE(0)		|	\
+				 EBC_BXAP_WBF_ENCODE(0)		|	\
+				 EBC_BXAP_TH_ENCODE(1)		|	\
+				 EBC_BXAP_RE_DISABLED		|	\
+				 EBC_BXAP_SOR_DELAYED		|	\
+				 EBC_BXAP_BEM_RW		|	\
+				 EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB3CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \
+				 EBC_BXCR_BS_1MB		|	\
+				 EBC_BXCR_BU_RW			|	\
+				 EBC_BXCR_BW_32BIT)
+
+/*
+ * PPC4xx GPIO Configuration
+ */
+
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	GMC1TxD(0)	USB2HostD(0)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	GMC1TxD(1)	USB2HostD(1)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2	GMC1TxD(2)	USB2HostD(2)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3	GMC1TxD(3)	USB2HostD(3)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4	GMC1TxD(4)	USB2HostD(4)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5	GMC1TxD(5)	USB2HostD(5)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6	GMC1TxD(6)	USB2HostD(6)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	GMC1TxD(7)	USB2HostD(7)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	GMC1RxD(0)	USB2OTGD(0)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	GMC1RxD(1)	USB2OTGD(1)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2)	USB2OTGD(2)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3)	USB2OTGD(3)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4)	USB2OTGD(4)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5)	USB2OTGD(5)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6)	USB2OTGD(6)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7)	USB2OTGD(7)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER	USB2HostStop	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD		USB2HostNext	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER	USB2HostDir	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN	USB2OTGStop	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS	USB2OTGNext	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV	USB2OTGDir	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0)				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1)				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2)				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0	DMAReq2		IRQ(7)*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1	DMAAck2		IRQ(8)*/ \
+},											\
+{											\
+/* GPIO Core 1 */									\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2	EOT2/TC2	IRQ(9)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3	DMAReq3		IRQ(4)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3	UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N	EOT3/TC3	UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)				*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)				*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)				*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)		DMAReq1		IRQ(10)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)		DMAAck1		IRQ(11)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)		EOT/TC1		IRQ(12)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)	DMAReq0		IRQ(13)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6)	DMAAck0		IRQ(14)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7)	EOT/TC0		IRQ(15)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit	*/	\
+}											\
+}
+
+#endif	/* __CONFIG_H */
-- 
1.7.1



More information about the U-Boot mailing list