[U-Boot] [PATCH] ARM: Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate

[Albert ARIBAUD]

Le 10/06/2010 11:12, Tanmay Upadhyay a écrit :

> This patch modifies existing OpenRD-Base support to deal with all
> the three OpenRD boards (OpenRD-Base, OpenRD-Client&  OpenRD-Ultimate).

Probably small detail: this patch replaces the @ by an <at> in the 
e-mail addresses (not only the patch author's). Is it a policy for 
submitting patches to u-boot that all e-mail addresses should be 
'obfuscated' so?

More important: I've tried running the resulting u-boot on my 
OpenRD-Client by TFTPing it to RAM (the default OpenRD-Client config has 
CONFIG_SKIP_LOWLEVEL_INIT defined and CONFIG_SKIP_RELACATION undefined). 
Doing a 'go' to the load address causes no visible output on the console 
and no sign of life at all -- I have to reset the board to get back to 
the FLASH u-boot. Anyone here had better luck with the OpenRD client config?

Amicalement,
-- 
Albert.