[U-Boot] [PATCH v2 10/10] ARMV7: Enable i2c support on TI OMAP4 Panda

[Steve Sakoman]

This patch enables the i2c driver, i2c commands, and i2c multi-bus support

Signed-off-by: Steve Sakoman <steve at sakoman.com>
Acked-by: Heiko Schocher<hs at denx.de>
---

Changes in this version include:
 - Acked-by from Heiko

 include/configs/omap4_panda.h |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 9302ecb..a15c5f5 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -93,6 +93,15 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
+/* I2C  */
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_I2C_MULTI_BUS		1
+
 /* MMC */
 #define CONFIG_MMC			1
 #define CONFIG_OMAP3_MMC		1
@@ -108,6 +117,7 @@
 /* Enabled commands */
 #define CONFIG_CMD_EXT2		/* EXT2 Support                 */
 #define CONFIG_CMD_FAT		/* FAT support                  */
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
 #define CONFIG_CMD_MMC		/* MMC support                  */
 
 /* Disabled commands */
-- 
1.7.0.4