[U-Boot] [PATCH v3 00/10] Add support for TI OMAP4 SDP and Panda

[Steve Sakoman]

On Fri, 2010-06-18 at 16:10 -0500, Peter Tyser wrote:
> Hi Steve,
> 
> > Steve Sakoman (10):
> >   ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
> >   ARMV7: Add basic support for TI OMAP4
> >   ARMV7: Add support for TI OMAP4430 SDP
> >   ARMV7: Add support for TI OMAP4 Panda
> >   ARMV7: Restructure OMAP mmc driver to allow code sharing between
> >     OMAP3 and OMAP4
> >   ARMV7: Enable mmc support on TI OMAP4430 SDP
> >   ARMV7: Enable mmc support on TI OMAP4 Panda
> >   ARMV7: Restructure OMAP i2c driver to allow code sharing between
> >     OMAP3 and OMAP4
> >   ARMV7: Enable i2c support on TI OMAP4 SDP
> >   ARMV7: Enable i2c support on TI OMAP4 Panda
> 
> It'd be preferred if you could reorganize the patch series to first make
> all CPU/SOC changes, then finally do 1 patch for each board.  This is
> generally considered cleaner than having patches bouncing back and forth
> between common and board specific code.  Right now the SDP and Panda
> boards each require 3 patches when 1 patch apiece should suffice.  eg:
> ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
> ARMV7: Add basic support for TI OMAP4
> ARMV7: Restructure OMAP mmc driver to allow code sharing between OMAP3 and OMAP4
> ARMV7: Restructure OMAP i2c driver to allow code sharing between OMAP3 and OMAP4
> ARMV7: Add support for TI OMAP4430 SDP
> ARMV7: Add support for TI OMAP4 Panda

In the past I've had complaints that I should break each piece of
functionality into a separate patch :-)

I'm happy to do whatever is preferred!  Wolfgang, would you like a v4
with the proposed structure?

Regards,

Steve