[U-Boot] [PATCH][Net] Write MAC address automatically on MACB-based boards

Ben Warren biggerbadderben at gmail.com
Mon Jun 21 08:12:04 CEST 2010


On 6/1/2010 12:03 PM, Ben Warren wrote:
> Also, remove all calls to eth_init() in boards that use MACB
>
> Signed-off-by: Ben Warren<biggerbadderben at gmail.com>
> ---
> Please note: this is untested, but compiles cleanly
>
>   board/afeb9260/afeb9260.c                       |    7 -------
>   board/atmel/at91cap9adk/at91cap9adk.c           |    7 -------
>   board/atmel/at91sam9260ek/at91sam9260ek.c       |    7 -------
>   board/atmel/at91sam9263ek/at91sam9263ek.c       |    7 -------
>   board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c |    7 -------
>   board/calao/sbc35_a9g20/sbc35_a9g20.c           |    7 -------
>   board/eukrea/cpu9260/cpu9260.c                  |    7 -------
>   board/ronetix/pm9263/pm9263.c                   |    7 -------
>   drivers/net/macb.c                              |   23 +++++++++++++++--------
>   9 files changed, 15 insertions(+), 64 deletions(-)
>    
Applied to net/next.

regards,
Ben


More information about the U-Boot mailing list