[U-Boot] mpc8343: TSEC1 @ RGMII stopped working

[André Schwarz]

Kim,

the 2nd TSEC has stopped working on both U-Boot and Linux on our MPC8343
based system (MVBLM7). Actually I stumbled over this by accident...

TSEC0+1 are using an VSC8601 connected via RGMII.

Since both Bootloader (U-Boot 2010.3) and OS (Linux 2.6.26.27) are
affected I suspect a configuration problem.

The PHY is working fine according to LED signalling.

mvBL-M7> mii info
->TSEC0 unplugged:
PHY 0x10: OUI = 0x01C1, Model = 0x02, Rev = 0x01,  10baseT, HDX
->TSEC1 plugged into GigE Network.
PHY 0x11: OUI = 0x01C1, Model = 0x02, Rev = 0x01, 100baseT, FDX
PHY 0x1F: OUI = 0x0000, Model = 0x00, Rev = 0x00,  10baseT, HDX


mvBL-M7> set ethact TSEC1
mvBL-M7> bootp
Speed: 1000, full duplex
Random delay: 603 ms...
BOOTP broadcast 1
....


Any hints where to look ?
Have I missed some changes lately ?



Regards,
André


MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim Reich