[U-Boot] flash regards

[Nikumbh, Raj]

I think the flash is at 0x10000000. Do you have a Jlink or SAM-ICE with you. If yes you can put the uboot.bin that is generated once you crosss compile the uboot at 0x10000000 and then set BMS pin low at the power up. 

This will give you uboot prompt as controller bootm from external.  

Regards
Raj Nikumbh   
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Rajeesh.R
Sent: Tuesday, June 22, 2010 6:11 PM
To: u-boot at lists.denx.de
Subject: [U-Boot] flash regards

Hi, 

 I am work with AT91rm9200dk board 
 AT49BV642DT flash is using for  keep uboot  .
 In uboot which file and where the is the flash mode selection ie botom
boot or   top boot flash selection is specifying. Or how can I configure
this flash in Uboot . 
please help me ...

With Thanks
Rajeesh.R