[U-Boot] SPEAr (ARM) patchset inclusion for u-boot
Armando VISCONTI
armando.visconti at st.com
Tue Jun 22 17:30:20 CEST 2010
Tom,
As the patchset has already been acked by the proper people
in the community and since it has been floating around for long
time can you possibly include it in your tree?
Actually we really believe in open source contribution, but I'm
worried that Vipin is getting a little bit frustrated as he doesn't
see the conclusion of his hard work.
THanks for letting us know,
Armando
On 6/22/2010 4:23 PM, Vipin Kumar wrote:
> On Mon, Jun 14, 2010 at 1:42 PM, Vipin KUMAR<vipin.kumar at st.com> wrote:
>
>> On 6/11/2010 11:44 AM, vipink wrote:
>>
>>> Dear Tom, Wolfgang,
>>>
>>> Can you please let me know the status of the remainging patches of this patch-set.
>>> I have not received any reply after sending v3 patch a long time back
>>>
>>>
>> Dear Tom, Wolfgang
>>
>> A gentle reminder
>>
>>
> Dear Tom, Wolfgang
>
> I am still waiting for a reply or the acceptance of the related this
> patch series
>
> Thanks in advance
>
> Regards
> Vipin
>
>> Regards
>> Vipin
>>
>>> These are the Acks I have already received
>>>
>>> SPEAr : Configuring FSMC driver for NAND interface
>>> http://www.mail-archive.com/u-boot@lists.denx.de/msg31656.html
>>> SPEAr : FSMC driver support added
>>> http://www.mail-archive.com/u-boot@lists.denx.de/msg31655.html
>>> SPEAr : i2c driver moved completely into drivers/i2c
>>> http://www.mail-archive.com/u-boot@lists.denx.de/msg31604.html
>>> SPEAr : USB Device Controller driver support added
>>> http://www.mail-archive.com/u-boot@lists.denx.de/msg32362.html
>>> SPEAr : macb driver support added for spear310 and spear320
>>> http://www.mail-archive.com/u-boot@lists.denx.de/msg33153.html
>>> SPEAr : Network support configured for spear SoCs
>>> http://www.mail-archive.com/u-boot@lists.denx.de/msg33152.html
>>>
>>> Thanks in advance
>>>
>>> Regards
>>> Vipin
>>>
>>> On 5/28/2010 10:22 PM, Vipin Kumar wrote:
>>>
>>>> Dear Wolfgang,
>>>>
>>>> This patch-set as been pending for a long time and it seems Tom is also away
>>>> from mails. A few patches have already been Acked by respective device owners
>>>>
>>>> Please let me know how do I get this patch-set included in 2006.06 release
>>>>
>>>> Thanks in advance
>>>> Vipin
>>>>
>>>> On Fri, May 14, 2010 at 8:26 AM, Vipin KUMAR<vipin.kumar at st.com> wrote:
>>>>
>>>>> Dear Tom,
>>>>>
>>>>> I am still waiting for Ack/feedback if any on this patchset v3
>>>>> All feedbacks provided by you on patchset v2 have been incorporated
>>>>>
>>>>> Regards
>>>>> Vipin
>>>>>
>>>>> On 5/9/2010 7:46 PM, Vipin Kumar wrote:
>>>>>
>>>>>> Hello Tom,
>>>>>>
>>>>>> Please consider this patch-set for mainline submission.
>>>>>> Please let me know if there are any changes to be made
>>>>>> in code or if the patches are good to go into mainline
>>>>>>
>>>>>> Thanks& Regards
>>>>>> Vipin
>>>>>>
>>>>>> On Thu, May 6, 2010 at 4:48 PM, Vipin KUMAR<vipin.kumar at st.com> wrote:
>>>>>>
>>>>>>> Hello Tom,
>>>>>>> The following patch-set contains all the accepted feedbacks on patch-set v2.
>>>>>>> Please consider this for submission into mainline
>>>>>>>
>>>>>>> Below changes are introduced other than the recieved review comments
>>>>>>> 1. Introduced a CONFIG_DW_SEARCH_PHY definition, which if defined searches
>>>>>>> the ethernet phy address. Searching was always enabled in earlier patch
>>>>>>> 2. Introduced a new function dw_write_hwaddr in ethernet driver and
>>>>>>> registered it as a callback via dev->write_hwaddr. This is a new feature
>>>>>>> recently implemented by Ben.
>>>>>>>
>>>>>>> Thanks in advance
>>>>>>>
>>>>>>> Regards
>>>>>>> Vipin
>>>>>>>
>>>>>>> Vipin Kumar (19):
>>>>>>> u-boot.img file not created when srctree and objtree are different
>>>>>>> change_bit routine defined
>>>>>>> SPEAr : SMI erase and write timeouts increased
>>>>>>> SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET
>>>>>>> SPEAr : Reducing the max RAM size to 128MB
>>>>>>> SPEAr : Basic arch related support added for SPEAr SoCs
>>>>>>> SPEAr : Network driver support added
>>>>>>> SPEAr : Network support configured for spear SoCs
>>>>>>> SPEAr : macb driver support added for spear310 and spear320
>>>>>>> SPEAr : FSMC driver support added
>>>>>>> SPEAr : Configuring FSMC driver for NAND interface
>>>>>>> SPEAr : i2c driver moved completely into drivers/i2c
>>>>>>> SPEAr : smi driver moved completely into drivers/mtd
>>>>>>> SPEAr : USB Device Controller driver support added
>>>>>>> SPEAr : Supporting various configurations for spear3xx and spear6xx
>>>>>>> boards
>>>>>>> SPEAr : Basic spear1300 architecture support added
>>>>>>> SPEAr : spear1300 SoC support added
>>>>>>> SPEAr : Removing extraneous code
>>>>>>> SPEAr : USB device controller bugfixes
>>>>>>>
>>>>>>> MAINTAINERS | 1 +
>>>>>>> MAKEALL | 1 +
>>>>>>> Makefile | 30 +-
>>>>>>> arch/arm/cpu/arm926ejs/spear/Makefile | 3 +-
>>>>>>> arch/arm/cpu/arm926ejs/spear/cpu.c | 78 +++
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 ++
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 114 +++++
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 96 ++++
>>>>>>> .../arm_cortexa8/spear13xx/reset.c} | 52 +--
>>>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/timer.c | 138 +++++
>>>>>>> .../arm/include/asm/arch-spear/clk.h | 26 +-
>>>>>>> arch/arm/include/asm/arch-spear/hardware.h | 16 +-
>>>>>>> arch/arm/include/asm/arch-spear/spr_misc.h | 5 +
>>>>>>> .../arm/include/asm/arch-spear13xx/hardware.h | 33 +-
>>>>>>> arch/arm/include/asm/arch-spear13xx/spr_gpt.h | 85 ++++
>>>>>>> arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++
>>>>>>> .../arm/include/asm/arch-spear13xx/sys_proto.h | 29 +-
>>>>>>> arch/arm/include/asm/bitops.h | 11 +-
>>>>>>> board/spear/common/Makefile | 10 +-
>>>>>>> board/spear/common/spr_misc.c | 28 +-
>>>>>>> board/spear/spear1300/Makefile | 51 ++
>>>>>>> board/spear/spear1300/config.mk | 28 +
>>>>>>> board/spear/spear1300/spear1300.c | 88 ++++
>>>>>>> .../spear/spear1300/spr_lowlevel_init.S | 35 +-
>>>>>>> board/spear/spear300/config.mk | 11 -
>>>>>>> board/spear/spear300/spear300.c | 15 +-
>>>>>>> board/spear/spear310/config.mk | 11 -
>>>>>>> board/spear/spear310/spear310.c | 36 ++-
>>>>>>> board/spear/spear320/config.mk | 11 -
>>>>>>> board/spear/spear320/spear320.c | 23 +-
>>>>>>> board/spear/spear600/config.mk | 11 -
>>>>>>> board/spear/spear600/spear600.c | 15 +-
>>>>>>> doc/README.designware_eth | 25 +
>>>>>>> doc/README.spear | 46 ++-
>>>>>>> drivers/i2c/Makefile | 2 +-
>>>>>>> drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +-
>>>>>>> .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +-
>>>>>>> drivers/mtd/Makefile | 2 +-
>>>>>>> drivers/mtd/nand/Makefile | 2 +-
>>>>>>> drivers/mtd/nand/fsmc_nand.c | 366 ++++++++++++++
>>>>>>> drivers/mtd/nand/spr_nand.c | 124 -----
>>>>>>> drivers/mtd/{spr_smi.c => st_smi.c} | 59 ++-
>>>>>>> .../arch-spear/spr_smi.h => drivers/mtd/st_smi.h | 8 +-
>>>>>>> drivers/net/Makefile | 1 +
>>>>>>> drivers/net/designware.c | 531 ++++++++++++++++++++
>>>>>>> drivers/net/designware.h | 264 ++++++++++
>>>>>>> drivers/serial/usbtty.h | 4 +-
>>>>>>> drivers/usb/gadget/Makefile | 2 +-
>>>>>>> drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 116 +++--
>>>>>>> include/configs/spear-common.h | 33 +-
>>>>>>> include/configs/spear13xx_evb.h | 202 ++++++++
>>>>>>> include/configs/{spear3xx.h => spear3xx_evb.h} | 30 ++
>>>>>>> include/configs/{spear6xx.h => spear6xx_evb.h} | 13 +
>>>>>>> include/linux/mtd/fsmc_nand.h | 104 ++++
>>>>>>> include/netdev.h | 1 +
>>>>>>> include/usb/{spr_udc.h => designware_udc.h} | 6 +-
>>>>>>> 56 files changed, 2993 insertions(+), 418 deletions(-)
>>>>>>> create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c
>>>>>>> rename arch/arm/{include/asm/arch-spear/spr_nand.h => cpu/arm_cortexa8/spear13xx/reset.c} (50%)
>>>>>>> mode change 100644 => 100755
>>>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/timer.c
>>>>>>> copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear/clk.h (64%)
>>>>>>> copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/hardware.h (58%)
>>>>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_gpt.h
>>>>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h
>>>>>>> copy include/configs/spear6xx.h => arch/arm/include/asm/arch-spear13xx/sys_proto.h (64%)
>>>>>>> create mode 100644 board/spear/spear1300/Makefile
>>>>>>> create mode 100644 board/spear/spear1300/config.mk
>>>>>>> create mode 100644 board/spear/spear1300/spear1300.c
>>>>>>> copy include/configs/spear6xx.h => board/spear/spear1300/spr_lowlevel_init.S (56%)
>>>>>>> create mode 100644 doc/README.designware_eth
>>>>>>> rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%)
>>>>>>> rename arch/arm/include/asm/arch-spear/spr_i2c.h => drivers/i2c/designware_i2c.h (98%)
>>>>>>> create mode 100644 drivers/mtd/nand/fsmc_nand.c
>>>>>>> delete mode 100644 drivers/mtd/nand/spr_nand.c
>>>>>>> rename drivers/mtd/{spr_smi.c => st_smi.c} (94%)
>>>>>>> rename arch/arm/include/asm/arch-spear/spr_smi.h => drivers/mtd/st_smi.h (96%)
>>>>>>> create mode 100644 drivers/net/designware.c
>>>>>>> create mode 100644 drivers/net/designware.h
>>>>>>> rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (91%)
>>>>>>> create mode 100644 include/configs/spear13xx_evb.h
>>>>>>> rename include/configs/{spear3xx.h => spear3xx_evb.h} (85%)
>>>>>>> rename include/configs/{spear6xx.h => spear6xx_evb.h} (82%)
>>>>>>> create mode 100644 include/linux/mtd/fsmc_nand.h
>>>>>>> rename include/usb/{spr_udc.h => designware_udc.h} (98%)
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> U-Boot mailing list
>>>>>>> U-Boot at lists.denx.de
>>>>>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
--
-- "Every step appears to be the unavoidable consequence of the
-- preceding one." (A. Einstein)
--
Armando Visconti Mobile: (+39) 346 8879146
Senior SW Engineer Fax: (+39) 02 93519290
CPG Work: (+39) 02 93519683
Computer System Division e-mail: armando.visconti at st.com
ST Microelectronics TINA: 051 4683
More information about the U-Boot
mailing list