[U-Boot] u-boot not giving output in Kermit on startup (OMAP3430 sdp)

[Aldo Cedillo]

Hey Shrikumar,

> Hi Aldo
> Thanks for your reply.
> Im using the Omap3430 SDP board, I used the config omap3_sdp3430.
> I used the following commit of u-boot:
> 1f241263e088a71b8f33f87b03a37c5418d41e2e
>
> Shrikumar Sharma
>

I just flashed main branch u-boot with the commit you are telling and
it went fine.

> I flashed in the u-boot to the H6 omap3430 board, but i get a blank screen
> on reset; moreover, when I use kermit via Serial port COM1, Im able to
> connect but I do not get the u-boot shell.
And I do get the prompt line from the shell.

Do you get something like this?
OMAP34XX SDP #

If you do you are in the shell, try typing printenv to test it.

Best regards.
Aldo Brett