[U-Boot] [PATCH] cmd_ide: Convert to [read,write][b,w]

Marek Vasut marek.vasut at gmail.com
Wed Jun 23 21:18:03 CEST 2010


Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
---
 common/cmd_ide.c |   22 +++++++++++++---------
 1 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 093ca9f..9c4b250 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -161,8 +161,8 @@ static uchar ide_wait  (int dev, ulong t);
 
 #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
 
-static void input_data(int dev, ulong *sect_buf, int words);
-static void output_data(int dev, ulong *sect_buf, int words);
+static void input_data(int dev, uint16_t *sect_buf, int words);
+static void output_data(int dev, uint16_t *sect_buf, int words);
 static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
 
 #ifndef CONFIG_SYS_ATA_PORT_ADDR
@@ -526,7 +526,7 @@ __ide_outb(int dev, int port, unsigned char val)
 {
 	debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
 		dev, port, val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
-	outb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
+	writeb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
 }
 void ide_outb (int dev, int port, unsigned char val)
 		__attribute__((weak, alias("__ide_outb")));
@@ -535,7 +535,7 @@ unsigned char inline
 __ide_inb(int dev, int port)
 {
 	uchar val;
-	val = inb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
+	val = readb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
 	debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
 		dev, port, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)), val);
 	return val;
@@ -937,9 +937,11 @@ output_data(int dev, ulong *sect_buf, int words)
 }
 #else	/* ! __PPC__ */
 static void
-output_data(int dev, ulong *sect_buf, int words)
+output_data(int dev, uint16_t *sect_buf, int words)
 {
-	outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words<<1);
+	int i;
+	for (i = 0; i < (words << 1); i++)
+		writew(sect_buf[i], ATA_CURR_BASE(dev)+ATA_DATA_REG);
 }
 #endif	/* __PPC__ */
 
@@ -995,9 +997,11 @@ input_data(int dev, ulong *sect_buf, int words)
 }
 #else	/* ! __PPC__ */
 static void
-input_data(int dev, ulong *sect_buf, int words)
+input_data(int dev, uint16_t *sect_buf, int words)
 {
-	insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1);
+	int i;
+	for (i = 0; i < (words << 1); i++)
+		sect_buf[i] = readw(ATA_CURR_BASE(dev)+ATA_DATA_REG);
 }
 
 #endif	/* __PPC__ */
@@ -1115,7 +1119,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 		return;
 #endif
 
-	input_swap_data (device, iobuf, ATA_SECTORWORDS);
+	input_swap_data (device, (uint16_t *)iobuf, ATA_SECTORWORDS);
 
 	ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
 	ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
-- 
1.7.1



More information about the U-Boot mailing list