[U-Boot] [PATCH v5 10/18] SPEAr : Configuring FSMC driver for NAND interface

[Scott Wood]

On Tue, Jun 29, 2010 at 10:53:38AM +0530, Vipin KUMAR wrote:
> From: Vipin KUMAR <vipin.kumar at st.com>
> 
> Since FSMC is a standard IP and it supports different memory interfaces, it
> is supported independent of spear platform and spear is configured to use that
> driver for interfacing with the NAND device
> 
> Spear platform uses generic FSMC driver and spear specific files i.e
> drivers/mtd/nand/spr_nand.c, arch/arm/include/asm/arch-spear/spr_nand.h are
> removed
> 
> Signed-off-by: Vipin Kumar <vipin.kumar at st.com>
> ---
>  arch/arm/include/asm/arch-spear/hardware.h |    8 +-
>  arch/arm/include/asm/arch-spear/spr_nand.h |   57 -------------
>  board/spear/spear300/spear300.c            |    7 +-
>  board/spear/spear310/spear310.c            |    7 +-
>  board/spear/spear320/spear320.c            |    7 +-
>  board/spear/spear600/spear600.c            |    7 +-
>  drivers/mtd/nand/Makefile                  |    1 -
>  drivers/mtd/nand/spr_nand.c                |  124 ----------------------------
>  include/configs/spear-common.h             |    2 +-
>  include/configs/spear3xx.h                 |    4 +
>  include/configs/spear6xx.h                 |    3 +
>  11 files changed, 28 insertions(+), 199 deletions(-)
>  delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
>  delete mode 100644 drivers/mtd/nand/spr_nand.c

Acked-by: Scott Wood <scottwood at freescale.com>

-Scott