[U-Boot] [PATCH] orion5x: edminiv2: add libata support

[Albert ARIBAUD]

Le 30/06/2010 23:30, Albert Aribaud a écrit :

> This patch:
> - adds support in libata for the orion5x MVSATAHC controller;
> - enables orion5x MVSTAHC port 1 on the edmini board;
> - adds IDE and EXT2 commands to the edminiv2 command set.

Note: commands "ide", "esxt2ls" and "ext2load" have been successfully 
tested. Command "diskboot" was not tested but should work as it requires 
no specific support wrt other disk-related commands.

Amicalement,
-- 
Albert.